Tweet
So I've got some eibach sport line lowering springs and I'm wondering how my car is going to look lowered with them. Anyone ever use these? And how was the ride and handling after the install?
-
sigpic
1993 z28 SS conversion. Fresh stroker engine (not disclosing Cid just yet) stg 3 700r4 3500 stall being lowered 2in, 4:10 rear,2 point frame connectors. Tubular rear control arms with LCARB, and much more -
Spot lines will be pretty low -
My car sits like a truck. And I'm running shorties right now so I'm not too worried about it being low but I just don't want it to be so low that I can't pull into a driveway without it destroying my front endsigpic
1993 z28 SS conversion. Fresh stroker engine (not disclosing Cid just yet) stg 3 700r4 3500 stall being lowered 2in, 4:10 rear,2 point frame connectors. Tubular rear control arms with LCARB, and much moreComment
-
Put em on and you wont need pictures!Makin Torque.Comment
-
Sport lines are going to be super low, and ride pretty rough. The Pro kit is a better alternative.
My car has cut front springs and heater hose mod in the back. IMO its about perfect.1998 Chevrolet Camaro Z28 - 6 SpeedComment
-
I have the LT1 ProKit on my 98 with 1/2" lift spacers up front (car has iron 6.0) and I can barely get into the driveway without tearing the exhaust off.
2014-10-21 18.56.18.jpg
1998 Camaro Z28 - Bright Red, 6.0 TR224, 4l60e, 3.42 Eaton TrueTrac
1989 Camaro IROC-Z Convertible - 355 big tube TPI, WC T5, 3.42 Zexel Torsen, CTS-V/C4 brakes
1955 Bel Air 2 Door Post - 357 TPI, Muncie M20, 4 wheel disc
2006 Saab 9-7x 5.3i Daily DriverComment
-
-
Boogie I can see you have some rocker damage. Ouch. That wasn't from the lowering springs was it?sigpic
1993 z28 SS conversion. Fresh stroker engine (not disclosing Cid just yet) stg 3 700r4 3500 stall being lowered 2in, 4:10 rear,2 point frame connectors. Tubular rear control arms with LCARB, and much moreComment
-
Eibach Pro-Kit out back and Coil-overs up front set pretty low.
sigpic
98' Trans Am - Huron Speed Turbo Car
Comment
-
Eibach Pro....1/2 coil cut up front.....reduced isolator out back.
sigpic
o·vr·kill [oh-ver-kil]1. an excess of what is required or suitable, as because of zeal or misjudgment.Comment
-
Whores..Makin Torque.Comment
-
'91 Camaro Modded, LSx, House of Kolor Intense White, lowered, GS chrome 18" wheels, 14" Brembo CTS-V on all 4 corners, LS rear end, FP suspension components
" When in doubt...throttle out ! "
ENVYsion Entertainment GroupComment
-
All the lows.
Comment
-
BMR 1.25" drop springs in the front
SLP .75" drop in the rear. (Might change to cut stock springs at some point ... same height.)
-Joel
1995 Z28 M6 - AI226/234 - autocross ricer
1984 Scottsdale K10 - 305/4bbl/4spd
WTB List:Midwest Chasis DS LoopComment
-
Full Pro-Kit. I scrape my exhaust pretty much daily its so low1994 Z28 Black, M6, Hardtop, SLP Loudmouth I, GM Performance Cold-Air Intake, 96-97 SS spoiler, 17" x 9.5" Chrome Z06 Motorsports, Longtubes
"It's not who I am underneath, but what I *DRIVE* that defines me."Comment
Comment