And so it begins.....

[DETROITMUSCLE]

thanks guys I think I can cut it and have a new end put on. -6 isn't cheap I'll have to measure it next time I'm up there and make sure its under 6" or so.

[1BADAIR]

dang. -6
you're going big

[DETROITMUSCLE]

dang. -6
you're going big

big noids, little shot. TNT F2 kits come with -6 and the solenoids are able to handle a bigger shot but I wouldn't spray that much through the ring or a plate. Not spraying any more than Raj and we have the same kit. You guys have extra jets lying around I need to buy some.

[kammi10]

you sure its not -4.. im pretty sure thats what most are.. -6 is basically 3/8 line and thats HUGE for nitrous

[DETROITMUSCLE]

I'll put a wrench on it but all TNT F2 kits came with -6 the F1 kits had -4 lines.

[97rs4life]

-6 that's a lot of nitrous flow, lol.

[kammi10]

FWIW jeff.. looking at a few kits online it looks like its just -4 like any other nitrous line. -6 would be incredibly big for a nitrous line especially when guys are shooting over 300 at a time through a -4..

[DETROITMUSCLE]

-6 that's a lot of nitrous flow, lol.

Its a plate style kit (actually a ring) that is rated for 350hp of nitrous.
this is the jet chart they send with the kit
TNT wet kit for power ring RWHP RATED 900psi bottle 60psi fuel -6an feed
dual jets
100HP 35N 22F
150HP 42N 25F
200HP 51N 28F
250HP 55N 31F
300HP 63N 35F
350HP 67N 39F

[1BADAIR]

raj has a harris plate
200 is marginal for a -4

[DETROITMUSCLE]

raj has a harris plate
200 is marginal for a -4

I believe I saw TNT noids under his hood, then again I've been wrong before

[1BADAIR]

they are. feeding a harris plate

[DETROITMUSCLE]

I believe you I just wanted to make sure I wasn't losing my mind. Is his feed line -6 or -4?

[1BADAIR]

he had a power ring kit but the ring wouldnt fit

[scholtmj]

http://www.discovery-automotive.com/...jects_roadkill

You should recognize that car Larry. Misery loves company.

[OIF1VET]

http://www.discovery-automotive.com/...jects_roadkill

You should recognize that car Larry. Misery loves company.

Sure do, I'll check it out tonight..