Announcement

**SS4Matt** · January 16th, 2007, 11:02 PM

hey thanks for throwing that up for me Tom!!

and for anyone wondering "removing road enviroment" is clay barring and whatever else needed to remove tar and whatnot!

Detail Express also tints windows on cars, boats, homes and offices! (Commercial and residential) we have been tinting for about 15 years and carry Llumar window film that comes with a lifetime warranty

to do the hatch and 2 side windows of an F-body any shade is $175

**MattODoom** · January 16th, 2007, 11:08 PM

How much for just my hatch to be redone (remove old and put on new tint)

**kammi10** · January 16th, 2007, 11:16 PM

whats wrong with your tint matt?

**SS4Matt** · January 16th, 2007, 11:21 PM

$100 for the tint, $30 to strip it, so $130, i'de have to check on tint though, if i remember correctly the third gen back window is like 40" tall and our tint comes in 36" length, so either it would have to be a 2 piece back window which we won't do lol because it looks tacky, or order a larger roll of tint like i had to do when i had my windshield tinted....i'll get back atcha tomarrow for sure!

**MattODoom** · January 16th, 2007, 11:33 PM

Well if its 30 bucks to strip it Ill do it myself. How long does it take to put a hatch tint on?

**SS4Matt** · January 16th, 2007, 11:40 PM

an hour or so... just be careful when you strip the hatch, you can't use a razorblade like on the side windows because you'll rip apart your defrost lines, what i do is remove the tint, spray the glue left on the glass all down with a "tint remover" which is just like googone that i get from the tint supplier, then use a white or grey scotch bright pad to losen it all up then squeegy the glue off! makes a freakin mess and stripping a back window generally takes longer then tinting it

**96mikez28** · January 16th, 2007, 11:42 PM

Do you work up there now tom?

**ITSSLOW** · January 16th, 2007, 11:42 PM

Originally posted by SS4Matt

hey thanks for throwing that up for me Tom!!

Not a problem. As you can tell by me putting it up at 3am I was bored and couldn't sleep. Any pics of Fbody rear tint? I'd have to see pics before getting it done. I've seen to many bad 3rd and 4th gen tint jobs

**ITSSLOW** · January 16th, 2007, 11:43 PM

Originally posted by 96mikez28

Do you work up there now tom?

No, just ****ING bored cause I couldn't sleep. I work at Vehicle Accessories in Grand Blanc. We've got stores in Clarkston and Bay City too so you some of you might of heard of it.

**MattODoom** · January 16th, 2007, 11:44 PM

Originally posted by SS4Matt

an hour or so... just be careful when you strip the hatch, you can't use a razorblade like on the side windows because you'll rip apart your defrost lines, what i do is remove the tint, spray the glue left on the glass all down with a "tint remover" which is just like googone that i get from the tint supplier, then use a white or grey scotch bright pad to losen it all up then squeegy the glue off! makes a freakin mess and stripping a back window generally takes longer then tinting it

Whats there to removing the defroster grid. I ****ing hate that shit and want it gone.

**96mikez28** · January 16th, 2007, 11:47 PM

Originally posted by KuruptWS6spd

No, just ****ING bored cause I couldn't sleep. I work at Vehicle Accessories in Grand Blanc. We've got stores in Clarkston and Bay City too so you some of you might of heard of it.

lol at bordom, that's pretty cool.

Hey "other" matt i heared Mike K don't work up there anymore, is that true?!?

**SS4Matt** · January 16th, 2007, 11:47 PM

lemme see...i don't have any pictures of third gen tint, as i've only seen 1 third gen get tinted at my work in the 3 years or so i've worked there....but we've done a few f-bodies, hell Angies parents TA has their hatch done in 15% i believe....Mike (slo98ss or something like that) had his hatch and sides done at my work as well, i don't have really any close ups, this is the best i can find of my car....4th gen hatch's are a piece of cake...it's the third gen hatchs that suck because the defrost line thing that runs almost all the way up the sides....

**MattODoom** · January 16th, 2007, 11:56 PM

Originally posted by KuruptWS6spd

Any pics of Fbody rear tint?

Wouldnt have an fbod without a tinted hatch... it looks so much better...

**SlipStreamZ28** · January 17th, 2007, 12:15 AM

Originally posted by SS4Matt

lemme see...i don't have any pictures of third gen tint, as i've only seen 1 third gen get tinted at my work in the 3 years or so i've worked there....but we've done a few f-bodies, hell Angies parents TA has their hatch done in 15% i believe....Mike (slo98ss or something like that) had his hatch and sides done at my work as well, i don't have really any close ups, this is the best i can find of my car....4th gen hatch's are a piece of cake...it's the third gen hatchs that suck because the defrost line thing that runs almost all the way up the sides....

what % tint is that your using matt?

Log in

Announcement

Services/Pricing

Services/Pricing

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment