Save $$$ On Select Dart Blocks And Cylinder Heads

[csmith4153]

Save $$$ On these select Dart blocks and cylinder heads. Please contact me for pricing and availability.

Small Block Chevy Little M Cast Iron Engine Blocks
p/n 31151111 - 9.025" deck height; 4.000" bore; 2.45" main caps
p/n 31151211 - 9.025" deck height; 4.125" bore; 2.45" main caps

Small Block Chevy Aluminum Pro 1 Cylinder Heads
p/n 11511123P - 215cc intake runners; 64cc chambers; 2.05" intake; 1.60" exhaust; assembled

Small Block Chevy Iron Eagle Cylinder Heads
p/n 10310010PF - 200cc intake runners; 49cc combustion chambers; 2.02 intake; 1.60" exhaust; Bare

Big Block Big M Cast Iron Block
p/n 31263444 - 9.800" dech height; 4.500 bore

Big Block Chevy Aluminum Pro 1 Cylinder Heads
p/n 19200010 - Bare; 119cc chambers; 325cc intake runnners; 2.25" intake; 1.88" exhaust
p/n 19200116 - same as p/n 19200010 but assembled

Big Bock Iron Eagle Heads
p/n 15200132 - 345cc intake runners; 119cc combustion chambers; 2.30" intake; 1.88 exhaust; assembled

LS1 Chevy Pro 1 Aluminum Cylinder Heads
p/n 11010010 - 205cc intake runners; bare

Again, Prices are to low to print so please contact me.

[MP81]

Wish they made a head for the Ecotec.

[bigjon88]

Sent ya a pm

[MiT/A'96]

Good prices on those heads..
Here's your chance if you need some...
Patronize our sponsers !!

[csmith4153]

Sent ya a pm

Jon, please re-send that pm. Its not in my in-box.

[bigjon88]

i did thanks for the info let me see what funds i have this month how long is this going on for?

[csmith4153]

i did thanks for the info let me see what funds i have this month how long is this going on for?

End of August or when they are gone. I could back-order them if they sell out, but I woudnt have a time frame for shipping.

[bigjon88]

alright thanks for the info i will let ya know, i gonna send ya an e-mail in afew days so i can get that cam set order from ya

[csmith4153]

alright thanks for the info i will let ya know, i gonna send ya an e-mail in afew days so i can get that cam set order from ya

Wasnt that a kit that I needed to special order? Or was I going to piece it together? You will need to refresh my memory, lol...

[bigjon88]

i'lll get back to ya