Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
Looking to buy a dash harness. I believe I need a 97-02 Camaro... A 93-02 TA might work. Not positive on that.
Thanks.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
I also want to point out that you need to use a 97 cluster. Even though the 98 and better will fit, the fuel gage uses a different resistance. So it wont work with the sender in your tank. Just a heads up.
Edit. The above being said, that may also limit your harness choices. For instance, the 98 fuel sender is grounded in the pcm, not the chasis. It shares this ground with the pump. And some sensors in the tank that your car wont have. So it may be even more problematic than just the tank. I think it may be easier to just repin the cluster connector to your new cluster.
Last edited by zeeman; October 6th, 2014, 07:20 AM.
I'm aware of needing a 97 specific cluster. I wouldn't be replacing the entire body harness.
[MENTION=2227]white97z28[/MENTION]
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
I also want to point out that you need to use a 97 cluster. Even though the 98 and better will fit, the fuel gage uses a different resistance. So it wont work with the sender in your tank. Just a heads up.
Edit. The above being said, that may also limit your harness choices. For instance, the 98 fuel sender is grounded in the pcm, not the chasis. It shares this ground with the pump. And some sensors in the tank that your car wont have. So it may be even more problematic than just the tank. I think it may be easier to just repin the cluster connector to your new cluster.
Also Nick would of already swapped yours over to the newer harness. The headlight switch is different, fog lights, radio, trunk release..etc. It's more than just the cluster.
2002 Z28 Camaro A4 1993 Z28 Camaro M6- SOLD 1999 Z28 Camaro M6- SOLD 2008 Ford Fusion SE - DD
-- MCALUS MOLDED PILLAR PODS, PM ME FOR MORE INFO--
sigpic
Yeah Joe's harness is still the 1994 one all I did is re wire the cluster connector, headlight connector, move fog light connector, move and re-wire hatch release, Move and re-wire rear defroster, Cut and re-wire the 12v plugs from 1 to 2...I don't think I am forgetting anything...the HVAC wires and vacuum lines are the same...just the rear defrost moves from the panel under the steering column to the HVAC control. And Joe's I also ran all new speaker wires behind dash simply because the bose speaker wiring was so dumb.
1999 z28 Bright Blue Metallic 1 of 10
1999 z28 Hugger Orange RS 1 of >309 (Sold)
1997 z28 White 6 speed Heads and Cam. (Sold)
1994 z28 PPM auto Cam only (Sold)
1984 sport coupe red 4 cyl (Sold)
Comment