WTB: lots of stock LS stuff. swapping 5.3 into LT car.

[formula218]

getting parts around to swap a 5.3 into my firebird. i'm sure i'll need a lot more than this but this is what i can think of right now lol

- LS spindles
- F-body engine wiring harness
- F-body accessories/brackets
- F-body oil pan
- LS fuel rail
- LS/T56 bell housing/input shaft/front plate


already have:
tubular K with mounts
motor w/ harness and ecu
LS1 intake manifold and TB & arp hardware
LS6 injectors

[MunsterZ28]

for the oil pan everyone wants over $200 used that i can find and chevy wants less than that brand new, http://www.superchevyperformance.com/ShoppingCart.asp. this is by far the cheapest i have found.

[86N/A]

^^^ agreed, ill be buyin mine from here. Like 250 with gaskets, bolts, windage tray, baffle, pic up tube, oil sensor only 250 shipped all new

[formula218]

for the oil pan everyone wants over $200 used that i can find and chevy wants less than that brand new, http://www.superchevyperformance.com/ShoppingCart.asp. this is by far the cheapest i have found.

thanks for the tip, i'll just do that then.
@MunsterZ28 the link says "There are no items in your shopping cart." any way you could link me right to the product page of the one you're talking about?

http://www.superchevyperformance.com...p/19212593.htm ? "This oil pan kit is based on the Hummer H3 V* oil pan and will work in virtually all 1955-1995 GM front engine RWD (rear wheel drive) V-8 cars when used with an LS engine."

[dawdaw]

isn't that K member set up for lt1 mounts that you just bought from MWC?

[formula218]

WTB: lots of stock LS stuff. swapping 5.3 into LT car.

No, solid LS mounts

[Superman09]

I have front spindles with hubs, complete fresh brakes (drilled/slotted rotors) along with a complete 99' engine harness and computer. PM me if interested! Located in Port Huron

[formula218]

would you be willing to separate the spindles, [MENTION=393]Superman09[/MENTION]? i don't need the hubs or brakes because i can use my current hubs (i think?) and i'm doing CTS-V calipers w/ 14" rotors.

i'm interested in the harness though. also i see you have a LS water pump and power steering pump for sale, do you know if i will need to replace those on my 5.3? if so maybe we can work out a package deal for it all. make me a good deal on the spindles and i'll get a PS line kit too! i was supposed to get a set today for $40 but the guy ended up deciding to use them

[Superman09]

I really don't want to take them apart at this time. I will sell the wiring harness however along with the power steering pump and water pump! Make an offer!

would you be willing to separate the spindles, @Superman09? i don't need the hubs or brakes because i can use my current hubs (i think?) and i'm doing CTS-V calipers w/ 14" rotors.

i'm interested in the harness though. also i see you have a LS water pump and power steering pump for sale, do you know if i will need to replace those on my 5.3? if so maybe we can work out a package deal for it all. make me a good deal on the spindles and i'll get a PS line kit too! i was supposed to get a set today for $40 but the guy ended up deciding to use them

[formula218]

Oil Pan, Oil Pan Pikcup Tube, LS Windage Tray, Oil dipstick, dipstick tube

*ordered*

[MunsterZ28]

thanks for the tip, i'll just do that then.
@MunsterZ28 the link says "There are no items in your shopping cart." any way you could link me right to the product page of the one you're talking about?

http://www.superchevyperformance.com...p/19212593.htm ? "This oil pan kit is based on the Hummer H3 V* oil pan and will work in virtually all 1955-1995 GM front engine RWD (rear wheel drive) V-8 cars when used with an LS engine."

sorry i didnt see this for some reason. i gave ya the wrong link but it looks like ya got your stuff ordered!

[pferris]

I should have a set of ls spindles out in my garage. i will have to check.

[formula218]

Yeah I found the "fbody" one. $277 for everything shipped.

[formula218]

I should have a set of ls spindles out in my garage. i will have to check.

You would be one awesome guy if you did, and didn't want to anymore!

[hoogiesngrinderz]

I wish I got a commission on all of the sales I referred to superchevyperformance! I tell one person and it spreads like wildfire