Announcement

Collapse
No announcement yet.

need manual window door panels for 93-02 firebird

Collapse
X
Collapse
Who has read this thread:
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    need manual window door panels for 93-02 firebird

    almost anyshape/color THANKS!
    sigpic
    Tags: 93-02, assembly, camaros, car, check, color, cutout, door, dow, ebay, firebird, firebirds, good, hat, hey, hole, line, manual, material, pair, panels, plastic, present, ski, window
  • #2
    Not sure about firebirds but on camaros the hole already exists in the plastic, you just have to puncture through the outer material. They used the same panels on the assembly line.
    -Joel
    1995 Z28 M6 - AI226/234 - autocross ricer
    1984 Scottsdale K10 - 305/4bbl/4spd


    WTB List:Midwest Chasis DS Loop

    Comment

    • #3
      Let me check the pair that I have to see if the cutout is present. They are currently on Ebay but have no bids yet.

      Comment

      • #4
        Originally posted by 01badbird View Post
        almost anyshape/color THANKS!
        Yikes...good luck on this one...

        You had to have a 1LE or a special ordered stripped-down-to-nothing car to get that one to happen.

        If may be cheaper and easier just to have the ones you have re-skinned...
        Originally posted by Redd8407
        I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
        Originally posted by Z28ISGR8
        WHY THE F*CK IS THERE A GOAT ON A FERRARI?
        Originally posted by Darren
        I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

        Comment

        • #5
          looking for something like this its like 100 on ebay but figure someone might have one lil closer man door panel.jpg
          sigpic

          Comment

          • #6
            and if you have these i also need a couple of other things (interior pc's and mirrors) biggest hurdle will be panels for new project !
            sigpic

            Comment

            • #7
              Here are the ones I have listed on Ebay. Joel is correct. The whole is precut in the backing. All you would need to do is cut the fabric for the window crank hole. If you want them, I will cancel the Ebay listing. I have alot of interior stuff and mirrors. I'm in Farmington and will PM you my phone number if you wanna come by.

              Comment

              Previous template Next
              Working...
              X