URGENT obscure LT1 parts needed

[alone_and_insane]

I'm trying to get my car back together, and I need a couple of things that I probably can't just get from O'Reilly or AutoZone.

First, there's some sort of line that goes from the front of the intake manifold then into the driver's side of the intake manifold. I can't find the second piece of rubber hose that actually goes back into the side of the manifold. I could have sworn that I had it sitting on my patio where I cleaned my intake off before going to powdercoat, but I can't find it anywhere.

I also am in need of bolts for the intake manifold. I stripped a couple and broke off the long stud that the black alternator bracket attaches to.



If anybody can get me that little bit of hose and that bolt, I would GREATLY appreciate it!

[ryanwarby01]

You can pick those up at a gm dealer too. I have the studed bolt, but not the rubber piece. I can drop it in the mail if you don't find one.

[alone_and_insane]

figured out the little bit I'm missing on the intake is for the PCV valve. I can't find the PCV valve either (I think they were still attached to each other), but I'm pretty sure I can get that from O'Reilly no problem. I could still use some spare intake manifold bolts and studs, however. Especially the one for the alternator bracket (since there's only one that length)

[alone_and_insane]

I also need the long stud for the alternator bracket. Does anybody have an extra one?

[alone_and_insane]

Bump. Just need the stud.

[alone_and_insane]

Basically I'm a massive idiot and was torquing to the wrong spec. Long story short, I need two intake manifold bolts. Just regular ones, not studs.