Please Help!!!

[my1994z28]

If anyone has ever changed their control arms or control bushings on their f-body,they will know what I am talking about..I am in need of 1 control arm bolt with the tab still attached..I took the camaro in for a front end alignment since I installed a complete BMR k-member,both upper and lower A-arms.some how one of the tabs got broken and fell off..I know when i installed everthing it was there..So please if anyone has one,let me know how much you want for it...Thanks..Pm me or call me 586-718-3887 Mike

[masterfab]

If anyone has ever changed their control arms or control bushings on their f-body,they will know what I am talking about..I am in need of 1 control arm bolt with the tab still attached..I took the camaro in for a front end alignment since I installed a complete BMR k-member,both upper and lower A-arms.some how one of the tabs got broken and fell off..I know when i installed everthing it was there..So please if anyone has one,let me know how much you want for it...Thanks..Pm me or call me 586-718-3887 Mike

what year car. i will look when i get home in the morning.

[bri2203]

Hey Mike,
I can help ya out as I am parting out a 2000 Trans Am $5, I have it in Madison Heights. I'll give you a call tomorrow

[my1994z28]

94 camaro..the bolt has a welded 'WASHER'on it with a little bent tab that goes in the hole on the k-member..Since the car has been pulling the wheels off the ground at the track,its possible that the A-arm could move when the car comes back down..which makes sense to me..I think the guy working on it broke it off..I see that Bmr and sphon sells the bolts,but they dont have the washer with the tab on them..Any help or advice is appreciated..Have to get the car ready for the Clinton Twp Cruise this weekend..

[my1994z28]

Got it taken care of...thanks

[ktl711]

Yay Brian!