Stock Parts for 3.8 Manual BEATER

[5NINE!]

So my 97' camaro has 383,000 on the odometer, but about 400,000 actual since the speedometer has been broken for a long time. I am looking to spend as little money as possible on this janky ride. I need the following, and am open to taking pretty much any other part that you are willing to throw at it.
MAF Sensor
Stock Muffler
Carpet
Bushings of any kind
Horns
Any suspension parts
A cheap shop manual ( Haines, etc.)
Cold Air Intake
ABS sensors
Clutch
Anything else that may help to keep this car going for the next three years...in Detroit. (Wayne State)

[jderry]

So my 97' camaro has 383,000 on the odometer, but about 400,000 actual since the speedometer has been broken for a long time. I am looking to spend as little money as possible on this janky ride. I need the following, and am open to taking pretty much any other part that you are willing to throw at it.
MAF Sensor
Stock Muffler
Carpet
Bushings of any kind
Horns
Any suspension parts
A cheap shop manual ( Haines, etc.)
Cold Air Intake
ABS sensors
Clutch
Anything else that may help to keep this car going for the next three years...in Detroit. (Wayne State)

I have a few


MAF
Lower Control Arms
Sway Bars
etc

Lots of other 3.8l stuff too

[5NINE!]

PM Sent

[jetice]

Anything that Dennis does not take, let me know. I just bought a 3.8 car, and it kind of went ka-blooey on the way home

[birdie2000]

I have a stock airbox from a 2000 3.8 you can have if that does you any good.

Also have stock rear and front LCAs I'll let go for cheap, and possibly a stock panhard bar.

Also have pretty much an entire front-end as far as suspension bushings, ball-joints, and tie rods go, all brand new. I can cut a deal on them if you wanted anything.

[5NINE!]

Motor parts (besides a MAF) are pretty much all yours for the taking. I need parts to make ole' Bessy stop clunking... and maybe a little interior help too.

[00firebird]

want some 1LE bushings for those stock rear control arms? they make a great combo. brand new in box never used asking $35

[5NINE!]

Those sound too good for Bessy. I'll post pictures of her beauty tomorrow. I think even the rubber bushings will outlast the body.

[c0ncEpT]

I just dropped him off some LCA's tonight. Z28 sway bar will follow shortly.

This thing is about as janky as they come. I love it.

[JoeliusZ28]

I have a stock panhard (track) bar you can have.

And yes guys there is no saving this one, the cancer is terminal. It Was a bright green metallic Y87 too. Did you get a speed sensor dennis? Bessie needs to roll 400

[JoeliusZ28]

I just dropped him off some LCA's tonight. Z28 sway bar will follow shortly.

This thing is about as janky as they come. I love it.

I believe as a y87 it should already have a z28 spec sway bar. Albeit probably a broken one Someone correct me if I'm wrong, I know it's at least true for the rear.

[birdie2000]

We need pics of this show-stopper.

[5NINE!]

Found the receipt for a new sensor from a few months ago so that's not the problem. the search continues. I want that odometer to set records.

[5NINE!]

Pics will come tomorrow when I have proper lighting to show all of the... character. She's lived a hard life. And the posi... well I lifted one tire and was able to spin it with very little resistance. Apparently I will be lying down 1's instead of 11's. lol

[ktl711]

I've kept most of my V6 parts on my car -- much to many peoples' dismay -- and I'm not sure it'll ever go LS1. But the Red Beast has a long way to go to catch up with Bessy -- like about 200,000 miles more to go!

Keep that old girl running! She's got miles to go before she sleeps!