WTB: Box/Chest Style Freezer

[Superman09]

Looking for a Box or Chest style Freezer. Want something obviously that works, and is in good shape, no eye sores please. Other than that I am not picky. Want something maybe 3 feet tall at the most. Thanks!

[Darren]

Have you looked new? They are quite reasonable.

[Superman09]

Have you looked new? They are quite reasonable.

I have not so I certainly will now, thanks!

[Darren]

I have not so I certainly will now, thanks!

I just bought one from Sears, less then $175 wasn't huge but was big enough for my needs.

[sman]

Nitrous filling?

[Superman09]

Nitrous filling?

Yessir.
I have all the stuff on the way to fill bottles. I am not sure how many I will be doing and working at Livernois last year I saw the pumps fail time and time again. Therefore I am going to start just freezing the bottles, and if need be later I will pick up a pump!

[sman]

I will keep that in mind!

I have a dilema maybe you can help with. My bottle is currently full, but I need to empty it so I can install the pressure switch for the heater in the bottle valve. Is there any way to save the nitrous in the bottle? or do I have to find a way to waste/use it?

[Superman09]

I will keep that in mind!

I have a dilema maybe you can help with. My bottle is currently full, but I need to empty it so I can install the pressure switch for the heater in the bottle valve. Is there any way to save the nitrous in the bottle? or do I have to find a way to waste/use it?

I don't think so. Either waste it, or wait until you use the bottle up to install the heater switch!

Edit: Why do you have to empty the bottle to install the switch? I don't recall having to do that with my NX automated heater

[sman]

Arent the 2 ports on the side of the bottle valve always open regardless of weather or not the bottle valve is open? I want the heater hooked up before the valve for safety reasons, like in case someone (myself) bumps the heater switch turning it on without opening the bottle = not good.

11700.jpg

Like right where this pressure gauge screws in, that always has pressure no matter what right?

[Superman09]

No I don't think so. I think with the valve closed, all ports are closed. I am not 100% though as I tied my pressure switch in with the feed line

Arent the 2 ports on the side of the bottle valve always open regardless of weather or not the bottle valve is open? I want the heater hooked up before the valve for safety reasons, like in case someone (myself) bumps the heater switch turning it on without opening the bottle = not good.

[ATTACH=CONFIG]40907[/ATTACH]

Like right where this pressure gauge screws in, that always has pressure no matter what right?

[squareandcompass]

For what its worth. I have a Kenmore freezer w/owners manual that you may be interested in If memory serves me correctly, I think its a 15 cubic foot. Although it may very well be 17 cubic foot. Chest style. Manufacture date of October 2000. Freezer is in very good shape. $75.00 dolla no holla. You come and pick it up. I'm located in Jackson. Lemme know.

Peace Out,
Cat.

[Superman09]

For what its worth. I have a Kenmore freezer w/owners manual that you may be interested in If memory serves me correctly, I think its a 15 cubic foot. Although it may very well be 17 cubic foot. Chest style. Manufacture date of October 2000. Freezer is in very good shape. $75.00 dolla no holla. You come and pick it up. I'm located in Jackson. Lemme know.

Peace Out,
Cat.

hmmm, seems like it's probably too big for my needs. Do you have a rough width/height/depth of that?
Algebra wasn't my best....

[squareandcompass]

hmmm, seems like it's probably too big for my needs. Do you have a rough width/height/depth of that?
Algebra wasn't my best....

35" Height x 42.5" Length x 27.5" Depth
After talking it over with my bride, we seem to recall this freezer is either a 11 or 13 cubic foot. We both forget which. The reason I'm wanting to pass this along is my bride is wanting a smaller freezer. One of those squarish models. It's just us two, so smaller in our case is more.

[SSTODD]

I just bought one from Sears, less then $175 wasn't huge but was big enough for my needs.

Me too, around $150 new G.E. from HOME DEPOT with free delivery!

[kammi10]

Arent the 2 ports on the side of the bottle valve always open regardless of weather or not the bottle valve is open? I want the heater hooked up before the valve for safety reasons, like in case someone (myself) bumps the heater switch turning it on without opening the bottle = not good.


Like right where this pressure gauge screws in, that always has pressure no matter what right?

No I don't think so. I think with the valve closed, all ports are closed. I am not 100% though as I tied my pressure switch in with the feed line

spencer you are correct. that always has pressure. u will have to use the bottle or waste it in order to change it. i recommend just waiting until its all hooked up and use the bottle and then install heater.