EGR Block off Plates

[00firebird]

does anyone have any? or can they make some? just curious, otherwise i'm waiting 5 days for it to arrive in the mail.

[Darren]

dont order it from summit, still waiting over a MONTH for mine to come in.

[00firebird]

I think i'll just go with these, they are MI based, hopefully they can ship them out fast.
http://shop.zzperformance.com/store/...Off-Plate.aspx

these are prettier though.
http://www.ebay.com/itm/380424851492...84.m1424.l2649

[meissen]

You could try reaching out to Creight on Facebook - he reopened his CS3Performance shop on e-bay.

[Fbomb]

If you need something temporary you can cut the tubes off of the block and pinch a quarter or other soft metal disk in there, maybe some jb weld to seal it.

[ricefed]

When I had my LT1 I made my own. Just cut a piece of sheet metal like from furnace ducting. Cut it to shape then use that orange silicone gasket maker. Worked perfect for the few years I had it.

[steddy]

Had them from ZZ performance and they leaked after about 1K miles. Ended up welding the port on the exhaust and brazing the port on the intake.

[ricefed]

Forgot to add that is after you cut that tube off.

[00firebird]

Had them from ZZ performance and they leaked after about 1K miles. Ended up welding the port on the exhaust and brazing the port on the intake.

how did you know they were leaking, codes? no codes to begin with though?

[jderry]

I have one from ZZP if you want it, also have a couple fuel rails

[steddy]

how did you know they were leaking, codes? no codes to begin with though?

I was getting codes for weak O2 signals and figured to take it back to the old days. Got a length of hose and started pin pointing sounds and thats when I got the leak from the headers at the outlet and then could hear the swooshing at the intake.