LT1 MAF sensor

[MeenZ28]

I need a good working maf for a 96' LT1 camaro. Would prefer screened but as long as it works. Please let me know asap!

[97firehawk]

I need one also .

[MeenZ28]

But that doesn't help me....

[97firehawk]

But that doesn't help me....

Hahahaha yeah I no. I think I'm guna just brake down and by a new one .

[meissen]

As far as I know, the LS1 maf is the same as the LT1 maf -- just to widen your choices for whatever you guys find.

[97firehawk]

As far as I know, the LS1 maf is the same as the LT1 maf -- just to widen your choices for whatever you guys find.

I believe that you can use the LS1 maf but you will have to have it tuned so it will run rite from my research the stock senser is the best .

[DETROITMUSCLE]

they are the same

[SWEETRIDE98]

Ive got a stock LT1 MAF $40 + Shipping and paypal fees. got a LS1 too and there both the same.. so I have 2 of them

[97firehawk]

So I called speedinc and they said they look the same and will work but you have to change the maf table in the tune to make it rite and I also had my buddy look it up on his interchange program he works at a local salvage yard and he said they are same 94-02 has anyone of you used a Ls1 maf on a LT1 just curious.

[kyleozzie]

i have a stock one that has lower miles with the screen still, 45 shipped.

[meissen]

So I called speedinc and they said they look the same and will work but you have to change the maf table in the tune to make it rite and I also had my buddy look it up on his interchange program he works at a local salvage yard and he said they are same 94-02 has anyone of you used a Ls1 maf on a LT1 just curious.

I don't remember who, but someone on this site did have an LS1 MAF and he threw it in his LT1 and had no problems as far as running funny or SES lights. Whether the tune was slightly off because it might have been reading differently, not sure...

[MeenZ28]

It might not be my maf after all.... The car keeps blowing the engine sensor fuse so i know i have a short somewhere. Most likly its that bunch of wires down the passenger side frame rail by the heAder. Ill let you know if i do end up needing a new maf.