Announcement

Collapse
No announcement yet.

Lt1 injectors

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lt1 injectors

    I need some 30lb injectors for the camaro,I am taking the car in next week for the tune and I need to get the injectors before I take it in..cash in hand...price,location,and miles on them please...Thanks

  • #2
    i'm pretty sure ls1 and lt1 are interchangeable.. someone correct me if i'm wrong.. but i have a set of 42lb injectors with 3-4000 miles on them for 225. they worked perfectly when i put the camaro away this fall.
    98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

    Comment


    • #3
      all injectors with ev1 connector are plug and play

      Comment


      • #4
        Plug and play but I think they flow at different rates depending on lt1 or ls1, no? I vaguely remember something about LS1 injectors but if you put it in a LT1 it'll flow at a different pressure?
        - Brian Meissen
        Owner, MiFBody.com
        Administrator, LTxTech.com


        1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
        2022 Camaro LT1 - "Cherry Bomb 2"
        Michigan FBody Meet & Greet Car Show 2022
        June 4th, 2022 - 9am to 3pm!!!
        The HUB Stadium, Auburn Hills, MI

        Comment


        • #5
          I dont need 42lb injectors...I need 30lb

          Comment


          • #6
            never know what you might need down the road! haha
            98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

            Comment


            • #7
              Originally posted by meissen View Post
              Plug and play but I think they flow at different rates depending on lt1 or ls1, no? I vaguely remember something about LS1 injectors but if you put it in a LT1 it'll flow at a different pressure?
              injector flow rate is based off of a given fuel pressure. the higher the pressure the more they flow. LT1 fuel pressure is 3 bar, LS1 fuel pressure is 4 bar

              Comment


              • #8
                Yeah I installed LT1 injectors on my TPI motor.
                My stock was 19# 350's had 22# and with the LT1's pushed it up to 24#.
                With an AFPR.

                Maybe different years were different, I'm not sure.
                sigpic

                Comment

                Working...
                X