Hey guys..I'm putting together a A/C system for my car...I still need a pressure switch. Also looking for the pressure switch pigtail and a/c compressor pigtail. I'm hoping someone one here ripped thier system out and has them laying around
.
Announcement
Collapse
No announcement yet.
Looking for 98-02 LS1 A/C stuff
Collapse
X
-
Not sure where exactly it's located on 4th gen. But it will have three wires going to it and should be mounted in an aluminum pressure line.Originally posted by sman View PostI have the pressure switch(I think) the little electrial guy in the tiny line that goes from the condenser thing into the heater box?sigpicTurbo Charged LS1/T56
Comment
-
I might be yanking my A/C off.. Debating it at the moment. If you don't have what you need, by the time I decide, you can have what you need off my car(if I pull it)... In a hurry? Might take me a few days to decide...sigpic
U.S. Army 1983-2005
11.20@122.37 1.51 60'
Originally posted by WMCCjames
"Plans Subject to change upon Sobering up"
Comment
-
No hurry Larry, let me know if you decide to do it, cause I might want some more stuffOriginally posted by OIF1VET View PostI might be yanking my A/C off.. Debating it at the moment. If you don't have what you need, by the time I decide, you can have what you need off my car(if I pull it)... In a hurry? Might take me a few days to decide...
sigpicTurbo Charged LS1/T56
Comment
-
you can have my whole ac setup if you want. i pulled out the canister and a couple lines. condensor is still in the car and all the wiring etc. i will be removing it this winter, or if you want to come out and remove it, than its yours! i think i have everything..98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater
Comment





Comment