rockers

[beardy2]

hello
does anyone have a stock set of rockers with the pivet ball and nut. I just want to get me car running so im trying to find a cheap set of rockers. for a sbc 350 late 70's early 80's
can anyone help

[beardy2]

anybody got a set.

[1BADAIR]

what heads

[ITSSLOW]

hello
does anyone have a stock set of rockers with the pivet ball and nut. I just want to get me car running so im trying to find a cheap set of rockers. for a sbc 350 late 70's early 80's
can anyone help

Wow, lucky you didn't have me send those to you. You kept telling me lifters.

[beardy2]

they arent anything special just stock 350 heads
specs
399899368-791.72/1.50
& 1.94/1.50115-17576 CC Chambers
Intake flow 150.8 CFM
Exhaust flow 91.1 CFM

ok i was a little wrong on the year sorry

[bri2203]

I have a set of stamped steel roller tipped rocker arms. I can count and see if I have all of the nuts and retainers tomorrow.

[beardy2]

allright just let me know if you have a full set and what you want for them.

[ITSSLOW]

Like I said, I've got a set of stock 305 rockers if you want them. Just have to get me a day or two to get them in a box and shipped or we can meet up for that car.

[beardy2]

well it depends on where you wanted to meet up i dont know how far you are from lansing but i work in lansing everyday. otherwise it would have to be on a weekend or one day after work. and what did you want to trade for the car again. I still need that shifter and could use those rims. and i dont have a prob with buying the rockers off of you if there cheap.

[bigjon88]

I have a set of 1.5 roller tip rockers 80$ and stock rockers 35$

[ITSSLOW]

well it depends on where you wanted to meet up i dont know how far you are from lansing but i work in lansing everyday. otherwise it would have to be on a weekend or one day after work. and what did you want to trade for the car again. I still need that shifter and could use those rims. and i dont have a prob with buying the rockers off of you if there cheap.

I'm an hour from Lansing. We could meet half way if you are interested.

[LS1Formulation]

Those heads will use non-guided rocker arms, so make sure they're not the type with the lip on either side of the valve stem.

[beardy2]

ill check.

[86iroc305]

i have a set of stamped roller tips for 50 let me know if interested

[beardy2]

im sorry i havent got back with any of you i do really need a set of these but i lost my job friday so now im trying to find another job so i can make rent. but i will be buying a set.