WTB: 3800, 4L60E, PCM and harness

[David A. Cates]

Like the title says. I'm in need of a complete 3.8 V6/AT powertrain from a 97-03 F-bod. I'm installing a 3800 into my S10, and figured finding a part out or swap with matching everything would be the easiest. I thought that it would also be easier to keep it local for pick-up purposes. I'm willing to go into IN or OH, if someone knows anyone out of state. Mileage of motor and tranny isn't real important, as long as they are in good working order. I need a base to begin my turbo build, eventually everything will be "beefed" up. TIA for any info you can provide.

[Yoeasy69]

i have a 4l60e with all components out of my 96 t/a w about 120 on the clock.. TC, shift cables, pedals , and the pigtails to it too..

it shifted fine.. threw a code about 4 k ago.. but i did an M6 swap so

its located in Havelock NC.. but i can ship.. have pallets and all that.. just let me know

[steddy]

In roughly a month, I'll have my 3800 and PCM out (though it's a '96).

[David A. Cates]

i have a 4l60e with all components out of my 96 t/a w about 120 on the clock.. TC, shift cables, pedals , and the pigtails to it too..

it shifted fine.. threw a code about 4 k ago.. but i did an M6 swap so

its located in Havelock NC.. but i can ship.. have pallets and all that.. just let me know

Let me see if I can find one locally. If not, I'll let you now.

[lozanoa11]

In roughly a month, I'll have my 3800 and PCM out (though it's a '96).

he could use it and just get a 97 pcm. same difference

[steddy]

he could use it and just get a 97 pcm. same difference

Very true. The '97 would make the availability for a JET chip or whatever also (in which case, I ended up with one).

[David A. Cates]

I have a 98 PCM and harness on its way, now I just need to get an engine and tranny.