Tweet
Special deal ONLY for a MIF-body member to avoid the hassle of having to ship a hood!
Up for sale is a Brand New Huron Speed V2 Twin Turbo Kit. We have just this ONE kit available with Hood Exit downpipes. These downpipes were one-off built for our shop car and will never be produced again, so this is the only chance to get this particular set-up.
We have here a brand new complete Huron Speed V2 Twin Turbo kit. 2-piece 3" downpipes removed from the kit and in place we have our lightly used, all stainless 3.5" hood exiting downpipes.
What you will receive:
-V2 .120 wall stainless v-banded manifolds (retain alternator down low)
-V2 .120 wall stainless v-badned T4 Hot-pipe with 44-46mm WG Flanges and primary O2 bungs
-.065 wall stainless 3" bumped immediately to 3.5" hood exiting downpipes. Requires work to your cooling system (hoses and water pump) to clear the exhaust. These downpipes are lightly used and have some clearance put in the passenger side pipe for extra tensioner clearance.
-Complete stainless cold-side piping
-All silicone couplers and t-bolt clamps
-All v-band clamps
-Stainless extra thick Twin Turbo Intercooler Bracket
-Base 3.5" thick Twin Turbo Intercooler
-Stainless nut/bolt kit
I have a VFN Outlaw ws9 hood with the holes already cut and finished off. We have over 40 hours in fabrication of this hood to fit the exhaust and finish off the hood. This is a 2-layer hood and with the holes cut the 2 layers were finished back off. This will save you tons of hours, headaches, and lots of labor time at the body shop!
$4250 and I can meet within an hour drive to deliver!
We can add in the following for you as well, PM for package pricing:
-Turbos (precision, comp, turbonetics)
-Wastegates (precision, turbosmart, xs-power)
-BOV's (xs-power, turbosmart)
-Oil Line Kit
-Coating to the kit (ceramic/powder)
-Upgrade the intercooler to the custom Bell 4.5" or 6" thick core
This kit will NOT require an aftermarket k-member as the exhaust simply exits the hood!
Up for sale is a Brand New Huron Speed V2 Twin Turbo Kit. We have just this ONE kit available with Hood Exit downpipes. These downpipes were one-off built for our shop car and will never be produced again, so this is the only chance to get this particular set-up.
We have here a brand new complete Huron Speed V2 Twin Turbo kit. 2-piece 3" downpipes removed from the kit and in place we have our lightly used, all stainless 3.5" hood exiting downpipes.
What you will receive:
-V2 .120 wall stainless v-banded manifolds (retain alternator down low)
-V2 .120 wall stainless v-badned T4 Hot-pipe with 44-46mm WG Flanges and primary O2 bungs
-.065 wall stainless 3" bumped immediately to 3.5" hood exiting downpipes. Requires work to your cooling system (hoses and water pump) to clear the exhaust. These downpipes are lightly used and have some clearance put in the passenger side pipe for extra tensioner clearance.
-Complete stainless cold-side piping
-All silicone couplers and t-bolt clamps
-All v-band clamps
-Stainless extra thick Twin Turbo Intercooler Bracket
-Base 3.5" thick Twin Turbo Intercooler
-Stainless nut/bolt kit
I have a VFN Outlaw ws9 hood with the holes already cut and finished off. We have over 40 hours in fabrication of this hood to fit the exhaust and finish off the hood. This is a 2-layer hood and with the holes cut the 2 layers were finished back off. This will save you tons of hours, headaches, and lots of labor time at the body shop!
$4250 and I can meet within an hour drive to deliver!
We can add in the following for you as well, PM for package pricing:
-Turbos (precision, comp, turbonetics)
-Wastegates (precision, turbosmart, xs-power)
-BOV's (xs-power, turbosmart)
-Oil Line Kit
-Coating to the kit (ceramic/powder)
-Upgrade the intercooler to the custom Bell 4.5" or 6" thick core
This kit will NOT require an aftermarket k-member as the exhaust simply exits the hood!
Comment