Tweet
Finally decided to just do an LS1 swap in my camaro so I'm selling all my stuff. Here's a short list with prices. Everything ships from grand rapids, MI on your dime. I do not take paypal, I take checks, money order, square payment, and popmoney. Offers accepted!
-ZZP Comp Cams GT2 camshaft - $250 (less than 1k miles)
-NEW manley 6.950 chromoly pushrods - $100
-USED CTS-VR ceramic lifters - SOLD
-USED LS9 springs, locks, and retainers - $75
-NEW comp rocker arm bolts - $20
-NEW felpro head bolts - $20
-USED zzp HV3 - $100
-NEW felpro valve seals - $15
-NEW complete set of new gaskets for the entire engine - $150
-cometic .051 MLS head gaskets - $150 (torqued but never ran)
-NEW iridium spark plugs- $35
-NEW Blue streak spark plug wires - $45
[COLOR=#333333]-maroon valve covers - $100
-USED LT1 fuel injectors with NEW EV1 adapters (at 45psi they flow 30 lb) $70
-rollmaster timing set $50 (in the bad engine because I thought that was the problem, ran less than 1 mile)
-3800 engine from F-Body L36, complete but has spun rod bearing, easy rebuild, less than 130k miles - $250
-3800 engine form Grand Prix L36 complete minus the top end and flex plate. Good engine. - $150
-PCM from F-Body 3800 - $75
-Used set of Rockers, rocker bolts, pushrods, springs, valves, retainers and seals, would prefer to sell all together - $50
- NEW flywheelbolts $30
-NEW Stage 8 locking header bolts - $40
-Engine wire harness from Fbody 3800 - $150
-Borg Warner world class T5 manual transmission from 01 Fbody less than 130k miles - $400
-Partially stripped Pacesetter Fbody headers and Y-pipe. Never installed. Was stripping them to put better paint on them. Will include paint. $150
-Set of P&P L36 heads, a lot of people don't like my round exhaust ports because they might restrict flow. I haven't tested them yet so you decide if you want them or not. Pics of in progress below. Will post finished pics soon. $300 shipped
If you need other pics just ask.
I realize a lot of the Fbody stuff won't sell here, once I get down to just the Fbody stuff I will move those items to another site.
I'll add more parts as I come across them. Texts get faster reply. 6166445482
-ZZP Comp Cams GT2 camshaft - $250 (less than 1k miles)
-NEW manley 6.950 chromoly pushrods - $100
-USED CTS-VR ceramic lifters - SOLD
-USED LS9 springs, locks, and retainers - $75
-NEW comp rocker arm bolts - $20
-NEW felpro head bolts - $20
-USED zzp HV3 - $100
-NEW felpro valve seals - $15
-NEW complete set of new gaskets for the entire engine - $150
-cometic .051 MLS head gaskets - $150 (torqued but never ran)
-NEW iridium spark plugs- $35
-NEW Blue streak spark plug wires - $45
[COLOR=#333333]-maroon valve covers - $100
-USED LT1 fuel injectors with NEW EV1 adapters (at 45psi they flow 30 lb) $70
-rollmaster timing set $50 (in the bad engine because I thought that was the problem, ran less than 1 mile)
-3800 engine from F-Body L36, complete but has spun rod bearing, easy rebuild, less than 130k miles - $250
-3800 engine form Grand Prix L36 complete minus the top end and flex plate. Good engine. - $150
-PCM from F-Body 3800 - $75
-Used set of Rockers, rocker bolts, pushrods, springs, valves, retainers and seals, would prefer to sell all together - $50
- NEW flywheelbolts $30
-NEW Stage 8 locking header bolts - $40
-Engine wire harness from Fbody 3800 - $150
-Borg Warner world class T5 manual transmission from 01 Fbody less than 130k miles - $400
-Partially stripped Pacesetter Fbody headers and Y-pipe. Never installed. Was stripping them to put better paint on them. Will include paint. $150
-Set of P&P L36 heads, a lot of people don't like my round exhaust ports because they might restrict flow. I haven't tested them yet so you decide if you want them or not. Pics of in progress below. Will post finished pics soon. $300 shipped
If you need other pics just ask.
I realize a lot of the Fbody stuff won't sell here, once I get down to just the Fbody stuff I will move those items to another site.
I'll add more parts as I come across them. Texts get faster reply. 6166445482
Comment