Tweet
First up - I have 2 QA1 Gen F double adjustable (24 way) rear shocks for sale. http://www.summitracing.com/parts/hal-dtc2502p
2015-01-07 14.37.59.jpg
2015-01-07 14.38.04.jpg
One of them needs rebuilt - I've been quoted $75-$100 plus shipping for the rebuild. Might not hurt to have both done. These are smooth bodied shocks so no coil-over possible. These are the older model, new ones are 18 way. Setup for a traverse mount with bearings in the lower mounts. IMO these are valved more for a street/track car than a drag car.
I'm thinking $100 for these.
--------
DynoTune 78mm n2o plate for a LS1. Includes jetting from 75 to 150 with extra fuel jets in between for more fine tuning. I think I have about $40 in the extra jets alone.
$100 for this as well.
2015-01-07 14.55.44.jpg
--------
3 27 spline 1350 u-joint transmission yokes (4l60, t56, th350, powerglide)
u1667 Strange billet (http://www.summitracing.com/parts/str-u1667) - natural finish. Nice shape - $100
2015-01-07 14.36.19.jpg
u1667 Strange billet (black) - (http://www.strangeengineering.net/dr...rome-moly.html) - a little beat up and the u-joints fit tight do to the snap ring receiver having minor damage. Ran on my car until this year like this. - $75
2015-01-07 14.36.16.jpg
moser branded inland empire billet yoke - (http://www.moserengineering.com/othe...50-series.html) - nice shape $100 - note this one is a longer yoke than most. 6" vs 5.5" - $100
2015-01-07 14.35.49.jpg
---------
3" od Chromoly strange driveshaft for a 9" rear (1" longer than stock) - bought from MWC with my fab 9" - replaced with a PST aluminum 3.5 to reduce resonance (minor vibrations). This shaft ran smooth until I went with 4.56 gears and the driveshaft rpm went up. 4.11 gears it didn't vibrate. Setup for 1350 ujoints, no transmission yoke - lets say $150 or $200 with any of the yokes above.
2015-01-07 14.39.37.jpg
---------
4th gen stock aluminum driveshaft - 60k miles - $75
---------
2 Salad Shooters - they have been plasti dipped black. $30
2015-01-07 14.43.34.jpg
85mm MAF - came off my TBSS - ran and drove fine. Looks like someone tried to take the screen out. $30
2015-01-07 14.40.08.jpg
T56 - LSx bellhousing - $175
2015-01-07 14.56.38.jpg
We can talk shipping prices and/or pickup/meeting.
2015-01-07 14.37.59.jpg
2015-01-07 14.38.04.jpg
One of them needs rebuilt - I've been quoted $75-$100 plus shipping for the rebuild. Might not hurt to have both done. These are smooth bodied shocks so no coil-over possible. These are the older model, new ones are 18 way. Setup for a traverse mount with bearings in the lower mounts. IMO these are valved more for a street/track car than a drag car.
I'm thinking $100 for these.
--------
DynoTune 78mm n2o plate for a LS1. Includes jetting from 75 to 150 with extra fuel jets in between for more fine tuning. I think I have about $40 in the extra jets alone.
$100 for this as well.
2015-01-07 14.55.44.jpg
--------
3 27 spline 1350 u-joint transmission yokes (4l60, t56, th350, powerglide)
u1667 Strange billet (http://www.summitracing.com/parts/str-u1667) - natural finish. Nice shape - $100
2015-01-07 14.36.19.jpg
u1667 Strange billet (black) - (http://www.strangeengineering.net/dr...rome-moly.html) - a little beat up and the u-joints fit tight do to the snap ring receiver having minor damage. Ran on my car until this year like this. - $75
2015-01-07 14.36.16.jpg
moser branded inland empire billet yoke - (http://www.moserengineering.com/othe...50-series.html) - nice shape $100 - note this one is a longer yoke than most. 6" vs 5.5" - $100
2015-01-07 14.35.49.jpg
---------
3" od Chromoly strange driveshaft for a 9" rear (1" longer than stock) - bought from MWC with my fab 9" - replaced with a PST aluminum 3.5 to reduce resonance (minor vibrations). This shaft ran smooth until I went with 4.56 gears and the driveshaft rpm went up. 4.11 gears it didn't vibrate. Setup for 1350 ujoints, no transmission yoke - lets say $150 or $200 with any of the yokes above.
2015-01-07 14.39.37.jpg
---------
4th gen stock aluminum driveshaft - 60k miles - $75
---------
2 Salad Shooters - they have been plasti dipped black. $30
2015-01-07 14.43.34.jpg
85mm MAF - came off my TBSS - ran and drove fine. Looks like someone tried to take the screen out. $30
2015-01-07 14.40.08.jpg
T56 - LSx bellhousing - $175
2015-01-07 14.56.38.jpg
We can talk shipping prices and/or pickup/meeting.
Comment