Dual Exhaust, Electric Cutouts, Stock Manifolds

[Fox Slaughter]

Moving in a different direction for the exhaust.

Have up for grabs a 3in X pipe with cutouts and Delta 40 Flowmasters axle dump.
I had them bolted up to Pacesetter headers.
They have 2 o2 bungs welded in, one on each side.
Currently can only find 1 block off plate, with try to find the other.
If you are putting Electric cutouts on I would cut off the flange and rotate it, right now they sit on an angle downward which is why mine scraped.
Price = 150 obo

DSCN0211.JPGDSCN0212.JPG

Two 3in QTP Electric Cutouts.
The wiring is still in the car, will be removing it this weekend.
One has scrape damage and the other needs a new motor assembly which is 50 bucks from QTP.
They cost 350 new, so for 240 bucks you can rebuild the one and the other one works fine.
http://shop.quicktimeperformance.com...ct_detail&p=55
I noticed its 60 bucks plus shipping so for that I will drop the price 20 bucks.
Price = 160 obo

DSCN0213.JPGDSCN0214.JPG

Stock manifolds for LT1
Price = Free

[nascarnate326]

Stock springs and you scraped then?

[Fox Slaughter]

I scraped them because the way flanges are mount they were on a 45* angle. So what I would do is cut the flanges off and rotate them and weld them back on. They shouldn't hit then. The system should be tucked a little bit more, I would drive around speed bumps and big bumps it would hit.

[Fox Slaughter]

Bump for price change.

[phoenix_rising]

Pics or video installed?

[Fox Slaughter]

Hm let me see.

222614_1972948839915_5538168_n.jpg

Cutouts closed. It gets quiet from the camera knocking the sound out. Crappy video but all I have.

[Fox Slaughter]

Fist-bump.jpg

Price change.