Announcement

Collapse
No announcement yet.

Second Gen ('79-'81) Chevy Camaro parts- interior, body, ect.

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Geoff-

    Hows $20 sound?

    I got some pics of them cleaned up a bit-








    They have some overspray on them and some light scratches on the glass. You could take all 3 for $50 if your interested. If my prices are high, give me a heads up. I really havnt looked them up to see what they sell for.....

    Comment


    • #17
      The passenger door is REALLY nice.....if you look past the 3 coats of paint......original white paint, blue paint and then primer. The primer was sprayed over the door handles and lock too.....

      Going to take some elbow grease to get these paint free.



      As far as Bondo- I cant find where there is any at all. Looks and sounds solid. 99% rust free too! The bottom rear corner has a tiny area of rust.



      There is no door skin, rear veiw morror, or window roll up handles. I have a rear veiw mirror for it w/o glass.



      It does have door handles (that are broken as seen in pic) and possibly the surround piece for the handle. Also has all the felt pieces to keep the window strait.

      Also has the outside trim, to keep moisture from getting into the door, but its been sprayed w/ primer. Shouldnt be too hard to clean up.



      The glass is good too, minus the typical scratches from rolling it up and down over the years. Not even noticable, till you look really hard.


      Comment


      • #18
        Originally posted by Dirty T/A View Post
        Geoff-

        Hows $20 sound?

        I got some pics of them cleaned up a bit-








        They have some overspray on them and some light scratches on the glass. You could take all 3 for $50 if your interested. If my prices are high, give me a heads up. I really havnt looked them up to see what they sell for.....
        Heres a pic of one on the car-

        Comment


        • #19
          Fenders are in GREAT shape-








          Rear bumper cover is very very nice-











          Drivers side rear seat cushion is in really good shape-




          The rear back seat might be better than some-




          The passenger side front seat will clean up VERY nice-




          Overflow box-





          Considering there are a few cracked areas, the front grill isnt too bad-




          Who doesnt need a spare headlight assembly, just in case????





          Rear glass is nice-

          Comment


          • #20
            I will also be very happy to entertain trades for parts of the car, or even the whole car!


            I need-

            For a SBC-

            Starter
            Alternator
            Power stearing pump
            Fuel pump
            Brackets
            Valve covers
            Header gaskets and header bolts
            Radiator and fan
            Distributer, wires, cap and rotor

            For a '79 T/A-

            Shaker
            Head lights and brackets
            (2) 255/ 40-60/15 tires
            Break lines
            Radio
            Stearing wheel center cap
            Front bumper cover pontiac symbol
            Can or 2 of light grey or white sprayable primer

            Comment


            • #21
              How is the framing where it interfaces in the center? Like in the pic? Mine are all torn up in the area you can't see in the pics.

              -Geoff


              t-tops.jpg

              Comment


              • #22
                Have you got a glove box in decent shape? (the part that goes inside the door / cardboard-type material)? Thanks for posting your parts; I've got an '80 Camaro Z28 that I need just a few parts for. I need front seat belts (shoulder), but need black. Thanks. Signed, AIRINDUCTED email: davidgfrownfelter@gmail.com Flint.

                Comment


                • #23
                  How about exhaust?

                  Comment


                  • #24
                    Originally posted by whitehawk View Post
                    How is the framing where it interfaces in the center? Like in the pic? Mine are all torn up in the area you can't see in the pics.

                    -Geoff


                    [ATTACH=CONFIG]42813[/ATTACH]
                    I will get better pics for you to see soon. As far as I have seen- all is strait as can be.

                    Comment


                    • #25
                      Originally posted by airinducted View Post
                      Have you got a glove box in decent shape? (the part that goes inside the door / cardboard-type material)? Thanks for posting your parts; I've got an '80 Camaro Z28 that I need just a few parts for. I need front seat belts (shoulder), but need black. Thanks. Signed, AIRINDUCTED email: davidgfrownfelter@gmail.com Flint.
                      I will check the glove box out for you. Are you asking about a glove box in the door or the dash? The interior door skins are gone in the doors, but the dash glove box, from what I recall, is very nice. I am pretty sure the seatbelts are blue, but i will double check that also.

                      Comment


                      • #26
                        Originally posted by thisisthewayilive View Post
                        How about exhaust?
                        I have 2 sets of exhaust, from the mani/headers to the mufflers, no tail pipes. One set I will be keeping, and the other will be for sale. Both are in really nice shape. I will post more info after I get the other set out from under the camaro. Not sure which I will be keeping yet.

                        One has dual california turbo mufflers and the other ones mufflers brand is unknown so far.

                        Comment


                        • #27
                          Sorry for taking so long to all those interested in parts.....Work has called me in the last 2 weeks on all my days off.

                          I am getting out to the car today to get more parts off and get more pic/info for all interested. Sorry for the delay.

                          Comment


                          • #28
                            Originally posted by whitehawk View Post
                            Intersted in Driver's side t-top. how much? Assuming it is good where it meets the body in the center (mine was ripped open).

                            -Geoff
                            I have a bit of bad news.....mine are pretty torn up too.....

                            But I did find these for sale online-

                            http://www.rickscamaros.com/camaro-r...1978-1981.html


                            Heres some pics-

                            Passenger side #1-








                            And #2-





                            Comment


                            • #29
                              If you are still interested, I will let both passenger side and the one driver side go, to you, for $20- all 3. I didnt notice these parts werent in good shape.

                              Comment


                              • #30
                                Anyone need a gas tank? All seams are solid, and the top has just a bit of light surface rust- $30






                                Comment

                                Working...
                                X