Tweet
Hey guys, I have a bunch of stuff I need to get rid of, both to raise funds for my stagnant Firebird build, and to free up some space in the garage. . . I seriously have so much stuff in there, that I have to climb over boxes of Camaro/Firebird parts to get to my toolbox.
Here is a short list of SOME of the stuff I have. This list is by no means all-inclusive. If you have something in mind, PM me, I may have it. I don't really have time to look up what this stuff is going for in the used market, so just shoot me an offer. Looking for trades for some parts for my Firebird also, so let me know if you have anything I may be interested in.
1. Fiberglass 3" Pin-On LT1 Camaro SS-style hood-$300 w/ pins, brackets. Black gelcoat, good condition. PIN-ON ONLY! You cannot bolt this to your stock hinges, it will not work!
2. Stock heads for LT1-$250/set. I have sets, I'll have to look at the casting numbers, I'm keeping one set for my 'bird.
3. Stock spindles-make offer
4. Stock upper and lower A-arms-make offer. I have multiple sets, you can take your pick.
5. Dark grey leather seats, driver's power, from '98 SS. I have 1 1/2 sets of these (two sets of front seats, one set of rears). $350/best offer. Will sell just the fronts for $250.
6. Stock torque arm from '93 Formula. Make offer.
7. Various convertible top parts-Let me know what you need, or PM me for list of what's available.
8. OEWheels LLC. Corvette C5 "Deep Dish" staggered wheels. 17"x9.5" front, 18"x10.5" rear. Includes some well-used tires, VERY light curb rash on one of the front rims (friend dropped one on its face in the driveway upon removal from car), other three are in great shape. $500. All tires hold air, but they do need replaced. Possible trades for 17" rims w/ decent tires. These are the rims in my signature pic, they still look good, but they will need new tires soon, and I would probably do some repair work to minimize the appearance of chips/scratches on the lip of the damaged rim. I'd rate them 9/10, with the damaged rim being an 8/10. No dents, all hold air, just some light cosmetic scratches/scuffs. Still look good, but not in perfect condition. $500/best offer.
9. 93-97 Camaro billet grille. Excellent condition. $30.
10. 93-97 Camaro clear corners. Decent shape, may have a few scratches. $15.
11. Flowmaster 80 cat-back. Has 3" slash-cut stainless steel tips on it, very good condition. Muffler and piping may have some surface rust, but in good shape. Swapping it out for SLP 2OTL, so it's no longer needed. $100
12. Entertaining the idea of parting out a '96 Z28 Convertible, was planning to bring it back, but after "pep talk" from friends/family, and some common sense prevailing, it would be more cost-effective to fix up the Firebird and make it into what I want it to be. Complete car, minus engine and trans. Two spare tops, many spare parts that may be included for the right price. K-Member and all front suspension removed, have everything but shocks/springs to put it back on. Make an offer, I can take pics for anyone who's serious. PM for details. $1200/best offer for complete roller. If not sold in 30 days, I will start tearing it down to part it out. VERY negotiable on price, just get this thing out of my driveway!
Before anyone asks, the Michigan Firebird Club was at the Judging tent at CSF over the weekend, and only ONE of us had a running Firebird that made it to the show. Being the President of the MIFC, it makes sense that I should have a Firebird at events that I organize. The Camaro was a neat dream, but I don't have the funds, time, or motivation to put all of the work into it that it would need to make it into the car I want. The Firebird has been "my baby" for more than 5 years, I know what makes her tick, and I know what it needs to make it into a car I can really be happy with. Now, I'm just trying to free up the funds to get what's needed to start working on the Formula. I have a lot of parts ready, I just need to get it running/driving before I start installing the aftermarket goodies.
I have many more parts, so many, in fact, that I don't even know the extent of everything I have. If you need it, I may have it, feel free to ask. Prices are negotiable, feel free to make offers.
EDIT 7/13-Added some parts to list, interested in trades, list of what I'm looking for is in post #17.
Here is a short list of SOME of the stuff I have. This list is by no means all-inclusive. If you have something in mind, PM me, I may have it. I don't really have time to look up what this stuff is going for in the used market, so just shoot me an offer. Looking for trades for some parts for my Firebird also, so let me know if you have anything I may be interested in.
1. Fiberglass 3" Pin-On LT1 Camaro SS-style hood-$300 w/ pins, brackets. Black gelcoat, good condition. PIN-ON ONLY! You cannot bolt this to your stock hinges, it will not work!
2. Stock heads for LT1-$250/set. I have sets, I'll have to look at the casting numbers, I'm keeping one set for my 'bird.
3. Stock spindles-make offer
4. Stock upper and lower A-arms-make offer. I have multiple sets, you can take your pick.
5. Dark grey leather seats, driver's power, from '98 SS. I have 1 1/2 sets of these (two sets of front seats, one set of rears). $350/best offer. Will sell just the fronts for $250.
6. Stock torque arm from '93 Formula. Make offer.
7. Various convertible top parts-Let me know what you need, or PM me for list of what's available.
8. OEWheels LLC. Corvette C5 "Deep Dish" staggered wheels. 17"x9.5" front, 18"x10.5" rear. Includes some well-used tires, VERY light curb rash on one of the front rims (friend dropped one on its face in the driveway upon removal from car), other three are in great shape. $500. All tires hold air, but they do need replaced. Possible trades for 17" rims w/ decent tires. These are the rims in my signature pic, they still look good, but they will need new tires soon, and I would probably do some repair work to minimize the appearance of chips/scratches on the lip of the damaged rim. I'd rate them 9/10, with the damaged rim being an 8/10. No dents, all hold air, just some light cosmetic scratches/scuffs. Still look good, but not in perfect condition. $500/best offer.
9. 93-97 Camaro billet grille. Excellent condition. $30.
10. 93-97 Camaro clear corners. Decent shape, may have a few scratches. $15.
11. Flowmaster 80 cat-back. Has 3" slash-cut stainless steel tips on it, very good condition. Muffler and piping may have some surface rust, but in good shape. Swapping it out for SLP 2OTL, so it's no longer needed. $100
12. Entertaining the idea of parting out a '96 Z28 Convertible, was planning to bring it back, but after "pep talk" from friends/family, and some common sense prevailing, it would be more cost-effective to fix up the Firebird and make it into what I want it to be. Complete car, minus engine and trans. Two spare tops, many spare parts that may be included for the right price. K-Member and all front suspension removed, have everything but shocks/springs to put it back on. Make an offer, I can take pics for anyone who's serious. PM for details. $1200/best offer for complete roller. If not sold in 30 days, I will start tearing it down to part it out. VERY negotiable on price, just get this thing out of my driveway!
Before anyone asks, the Michigan Firebird Club was at the Judging tent at CSF over the weekend, and only ONE of us had a running Firebird that made it to the show. Being the President of the MIFC, it makes sense that I should have a Firebird at events that I organize. The Camaro was a neat dream, but I don't have the funds, time, or motivation to put all of the work into it that it would need to make it into the car I want. The Firebird has been "my baby" for more than 5 years, I know what makes her tick, and I know what it needs to make it into a car I can really be happy with. Now, I'm just trying to free up the funds to get what's needed to start working on the Formula. I have a lot of parts ready, I just need to get it running/driving before I start installing the aftermarket goodies.
I have many more parts, so many, in fact, that I don't even know the extent of everything I have. If you need it, I may have it, feel free to ask. Prices are negotiable, feel free to make offers.
EDIT 7/13-Added some parts to list, interested in trades, list of what I'm looking for is in post #17.
357ci LT1, cammed, stalled, and driven. 
It took me over a year to finally get rid of that kframe and spindles - aside from taking them to the scrap yard for scrap (I was too lazy to do), Dan was the first one willing to take them off my hands!
Comment