Announcement

Collapse
No announcement yet.

1971 Chevy 350 Complete Engine, 10,000 miles on Rebuild

Collapse
X
Collapse
Who has read this thread:
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    1971 Chevy 350 Complete Engine, 10,000 miles on Rebuild

    I have a 350 out of a 1971 Corvette, the owner of the car is the original owner of the car, he is family, and I saw this motor run and run well over the last few years. This engine was pulled for an upgrade in his Corvette (he built a 434 SB) I no longer have need for the engine, so I'm hoping someone can make use of it.

    Rebuilt 10 years ago, has approximately 10,000 miles on it, bored .030" over (355 CI).
    10:1 Compression, Hypereutectic Pistons
    Brodix Aluminum Heads, 2.05" intake valves
    Comp 270 Cam, Flat tappet Hydraulic
    Comp Cams 1.5 ratio roller tip rocker arms
    Brodix guide plates
    ARP Bolts
    High Volume Oil Pump
    Dual Plane Edelbrock Performer intake
    Mallory Unilite distributor
    High Volume Moroso Water pump
    I have a Holley 650 and the original Quadrajet Carb for this.

    The motor has been stored on the stand in my garage, I make sure everything looks good every few weeks, lube things up and keep it ready to run. It doesn't sit open like in the pictures either, it has valve covers on, intake is covered, plugs are in it, exhaust ports are covered.

    I'm asking $1500 or best offer, you can contact me via PM, email jasenc.green@gmail.com or phone at 616-481-6994.

    Thanks
    Attached Files
    Last edited by Orange Terror; April 22nd, 2012, 10:36 PM.
    Tags: 350, aluminum, cam, car, chevy, complete, corvette, covers, engine, exhaust, good, heads, intake, miles, motor, open, original, owner, pictures, rebuild, things, upgrade, water, weeks, years
  • #2
    That "010" block has high nichol content. On of the opposite side of the casting number is the date of the block.
    That engine may have originally been installed in a corvette but it was not last in a corvette.
    The motor mounts are wrong this has a long water pump. Corvette had short water pumps.

    Seems like a good deal especially with aluminum heads.

    Comment

    • #3
      Originally posted by bri2203 View Post
      That "010" block has high nichol content. On of the opposite side of the casting number is the date of the block.
      That engine may have originally been installed in a corvette but it was not last in a corvette.
      The motor mounts are wrong this has a long water pump. Corvette had short water pumps.

      Seems like a good deal especially with aluminum heads.
      No its an aftermarket water pump and different mounts. I had it in my 80 Camaro briefly.

      Comment

      • #4
        Thats a great Deal considering it has Alum Brodix heads on it.
        Western Michigan Camaro Club ~ President
        1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"
        2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"
        2005 Pontiac Grand Prix GT White, 3800
        WMCC Website www.wmcamaro.org

        "A government big enough to give you everything you want,
        is strong enough to take everything you have." — Thomas Jefferson

        "Democracy will cease to exist when you take away from those who
        are willing to work and give to those who would not."         — Thomas Jefferson

        Comment

        • #5
          Bump....still for sale

          Comment

          • #6
            tried to send pm box is full!
            Last edited by mcssmostwanted; May 15th, 2012, 07:27 PM.
            2005 Goat - Grass fed.

            1996 Camaro RS Vert. - Parted out and sold!

            Comment

            • #7
              If for some reason this ends up getting parted out let me know....I want those heads!
              Last edited by thisisthewayilive; May 15th, 2012, 11:16 PM.

              Comment

              • #8
                Originally posted by thisisthewayilive View Post
                If for some reason this ends up getting parted out let me know....I want those heads!
                For $1500 you can have them.
                Western Michigan Camaro Club ~ President
                1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"
                2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"
                2005 Pontiac Grand Prix GT White, 3800
                WMCC Website www.wmcamaro.org

                "A government big enough to give you everything you want,
                is strong enough to take everything you have." — Thomas Jefferson

                "Democracy will cease to exist when you take away from those who
                are willing to work and give to those who would not."                 — Thomas Jefferson

                Comment

                • #9
                  Originally posted by WMCC Gary View Post
                  For $1500 you can have them.
                  lol, I'd do that

                  Comment

                  • #10
                    Originally posted by mcssmostwanted View Post
                    tried to send pm box is full!
                    Originally posted by thisisthewayilive View Post
                    If for some reason this ends up getting parted out let me know....I want those heads!
                    PM Box is empty, suppose it was time, had over 600 messages from 2006-2010, lol.

                    Comment

                    • #11
                      Sold! And on its way to the east side. Thanks to mcssmostwanted, I hope it runs well for you for years to come.

                      Comment

                      Previous template Next
                      Working...
                      X