Tweet
All prices OBO. Will ship at buyer's expense. All items sold as is.
Will get pics as time allows. Click on pics for larger version.
Heads - SOLD
AFR 210 LT1/LT4
Ported for a blower application
222cc Intake Ports
78cc Exhaust Ports
64cc Combustion Chambers
Intake flow 283cfm @ .700" 4.030 bore
Exhaust flow 256cfm @ .600" w/ 1-5/8" pipe
Fresh valve job & resurface
Patriot Gold Xtreme springs shimmed & installed - new
Brand new - only used for mockup
Supercharger - SOLD
Vortech YSi
Satin
Straight Discharge
Brand new - only used for mockup
Supercharger Brackets - SOLD
Made by Chris Sikora aka Z8's
For LT1 F-bodies
Only used for mockup
Solid tensioner
Aluminum idler
Includes required Vortech brackets also
Requires ATI Balancer
MSD Crank Trigger setup for these brackets for additional fee (requires custom crank pulley also for sale)
Pulleys - $75/each or $350 for all
ASP Cog
For Vortech YSi or compatible
3 Gates Polychain GT kevlar belts also available
Blower:
3.125" 32 teeth
2.93" 30 teeth
2.75" 28 teeth
2.5" 26 teeth
Crank:
7.8" 79 teeth
6.75" 68 teeth
Bypass Valves -
Vortech "Super" Mondo Bypass - Now called the MaxFlow BV57
Satin
Used, in good condition
SOLD
Vortech Mondo Bypass
Polished
Used, in good condition
SOLD
Intercoolers -
Griffin A2A - SOLD
Mounts behind front bumper of 4th gen Camaro
Can include 3.5" aluminum piping with Vortech MaxFlow BV57 installed for an additional $375
Used, in good condition
Griffin A2A - SOLD
Mounts behind front bumper of 4th gen Firebird/Trans-Am
Endtanks positioned so inlet/outlet both located at bottom of the core
Only used for mockup
Headers - SOLD
Hedman Husler Part # 65385
1-7/8 Primaries
3.5" Collectors
Fits 93-97 F-body w/ LT1 engine
Jet Hot coated - excellent condition
Stahl bolt pattern - Adapter flanges & gaskets included
Used, in excellent condition
Fuel System -
Product Engineering PE 4550 Street Fuel Injection Pump - http://www.product-engr.com/Old/PE_4550.htm
Supports 1175hp
Cleanable fuel filter
Street-friendly - rated for continuous duty
Includes dual relay wiring harness
Alcohol Compatible
12 or 16 volts
Never used
SOLD
96lb Delphi Low-Impedance Fuel Injectors
Purchased from Racetronix
Flow-matched
Never used
SOLD
Speed Inc. Aluminum Factory-fit Fuel Cell for 4th Gen F-bodies
Sumped
Fits in factory location with factory straps
Includes factory sender adjusted for proper reading
Installed but never saw fuel
SOLD
Engine Management -
AEM EMS
From a Honda Civic (Serial #1010-0359)
Can control many different engines including LS1 engine or 24x converted LT1 with an adapted ECM connector
Used, in good condition
SOLD
F.A.S.T. Classic Sequential Fuel Injection
Programmed up for optispark
Includes wideband O2
Brand new universal LT1/SBC harness and injector harness
Everything else used, in good condition
$850
Will get pics as time allows. Click on pics for larger version.
Heads - SOLD
AFR 210 LT1/LT4
Ported for a blower application
222cc Intake Ports
78cc Exhaust Ports
64cc Combustion Chambers
Intake flow 283cfm @ .700" 4.030 bore
Exhaust flow 256cfm @ .600" w/ 1-5/8" pipe
Fresh valve job & resurface
Patriot Gold Xtreme springs shimmed & installed - new
Brand new - only used for mockup
Supercharger - SOLD
Vortech YSi
Satin
Straight Discharge
Brand new - only used for mockup
Supercharger Brackets - SOLD
Made by Chris Sikora aka Z8's
For LT1 F-bodies
Only used for mockup
Solid tensioner
Aluminum idler
Includes required Vortech brackets also
Requires ATI Balancer
MSD Crank Trigger setup for these brackets for additional fee (requires custom crank pulley also for sale)
Pulleys - $75/each or $350 for all
ASP Cog
For Vortech YSi or compatible
3 Gates Polychain GT kevlar belts also available
Blower:
3.125" 32 teeth
2.93" 30 teeth
2.75" 28 teeth
2.5" 26 teeth
Crank:
7.8" 79 teeth
6.75" 68 teeth
Bypass Valves -
Vortech "Super" Mondo Bypass - Now called the MaxFlow BV57
Satin
Used, in good condition
SOLD
Vortech Mondo Bypass
Polished
Used, in good condition
SOLD
Intercoolers -
Griffin A2A - SOLD
Mounts behind front bumper of 4th gen Camaro
Can include 3.5" aluminum piping with Vortech MaxFlow BV57 installed for an additional $375
Used, in good condition
Griffin A2A - SOLD
Mounts behind front bumper of 4th gen Firebird/Trans-Am
Endtanks positioned so inlet/outlet both located at bottom of the core
Only used for mockup
Headers - SOLD
Hedman Husler Part # 65385
1-7/8 Primaries
3.5" Collectors
Fits 93-97 F-body w/ LT1 engine
Jet Hot coated - excellent condition
Stahl bolt pattern - Adapter flanges & gaskets included
Used, in excellent condition
Fuel System -
Product Engineering PE 4550 Street Fuel Injection Pump - http://www.product-engr.com/Old/PE_4550.htm
Supports 1175hp
Cleanable fuel filter
Street-friendly - rated for continuous duty
Includes dual relay wiring harness
Alcohol Compatible
12 or 16 volts
Never used
SOLD
96lb Delphi Low-Impedance Fuel Injectors
Purchased from Racetronix
Flow-matched
Never used
SOLD
Speed Inc. Aluminum Factory-fit Fuel Cell for 4th Gen F-bodies
Sumped
Fits in factory location with factory straps
Includes factory sender adjusted for proper reading
Installed but never saw fuel
SOLD
Engine Management -
AEM EMS
From a Honda Civic (Serial #1010-0359)
Can control many different engines including LS1 engine or 24x converted LT1 with an adapted ECM connector
Used, in good condition
SOLD
F.A.S.T. Classic Sequential Fuel Injection
Programmed up for optispark
Includes wideband O2
Brand new universal LT1/SBC harness and injector harness
Everything else used, in good condition
$850
Comment