Announcement

Collapse
No announcement yet.

Powerdyne BD-11A and everything I have for it for sale

Collapse
X
Collapse
Who has read this thread:
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Powerdyne BD-11A and everything I have for it for sale

    1800.00 or best
    wide band gauge and sensor
    the K&N air filter
    2 FMUs the one that came with the kit and a cartech adjustable one
    a few different sized custom groved pulleys (dont remember how many or what the sizes are)
    a by-pass valve
    all I have for mounting is the plate that bolts to the supercharger, didnt have time to remove the rest when I took it off the car.
    2 impellars, the original one that is damaged and a custom one from 928 motor sports hardly used that along was 350 dollars
    casing was sent to 928 for installation of the cooling vents.
    I have new bearings cause I think they need to be replaced but havnt put them in yet.
    I had it on a 2002 3.8 liter
    If interested please respond or call my cell at (810) 531-3139
    Last edited by 2002 v6 camaro charged; February 22nd, 2011, 10:40 PM.
    2002 v6 camaro supercharged with a powerdyne pushing 12PSI, I also have an aluminum driveshaft, headers, high flow CAT, flowmaster exhaust, HP Tuners, AEM wideband, throttle body spacer, PCV bypass, cartech adjustable FMU, timing control module (wich I don't need now with HP Tuners but I am not going to spend the time to take it out), 3.23s with LSD, Spec stage 2 clutch, Exon (I think that is how you spell it) Ground effects, P&P throttle body, and GTP 36# injectors.
    Tags: 200, 2002, 3.8, 350, adjustable, air, call, car, cell, cooling, custom, gauge, hey, installation, interested, kit, motor, original, pass, plate, remove, respond, sale, sizes, supercharger, time
  • #2
    just to let you know a complete kit is struggling to sell on ftv6.com for $900, so your price might be a bit out there for not being complete.
    ------------------------------------------
    2004 GMC Envoy - Tuned, Airraid Intake, rest stock
    2005 Malibu - Stock, anyone have a ecotec factory gm supercharger for me? lol

    5th gen Camaro V6 Forums
    http://www.bowtiev6.com

    Comment

    • #3
      wow I know I have been out of the fbody world for awhile, but didnt think the value would drop that much, I might be better off parting it out
      2002 v6 camaro supercharged with a powerdyne pushing 12PSI, I also have an aluminum driveshaft, headers, high flow CAT, flowmaster exhaust, HP Tuners, AEM wideband, throttle body spacer, PCV bypass, cartech adjustable FMU, timing control module (wich I don't need now with HP Tuners but I am not going to spend the time to take it out), 3.23s with LSD, Spec stage 2 clutch, Exon (I think that is how you spell it) Ground effects, P&P throttle body, and GTP 36# injectors.

      Comment

      • #4
        Originally posted by 2002 v6 camaro charged View Post
        wow I know I have been out of the fbody world for awhile, but didnt think the value would drop that much, I might be better off parting it out
        not really the value dropping, it is worth 1200-1800, but the economy has nobody buying big ticket items in the v6 world. lol
        ------------------------------------------
        2004 GMC Envoy - Tuned, Airraid Intake, rest stock
        2005 Malibu - Stock, anyone have a ecotec factory gm supercharger for me? lol

        5th gen Camaro V6 Forums
        http://www.bowtiev6.com

        Comment

        • #5
          its makes me ill though to think how much money was dumped into that kit, 3800.00 new and I put another 1500.00 into it for upgrades lol
          2002 v6 camaro supercharged with a powerdyne pushing 12PSI, I also have an aluminum driveshaft, headers, high flow CAT, flowmaster exhaust, HP Tuners, AEM wideband, throttle body spacer, PCV bypass, cartech adjustable FMU, timing control module (wich I don't need now with HP Tuners but I am not going to spend the time to take it out), 3.23s with LSD, Spec stage 2 clutch, Exon (I think that is how you spell it) Ground effects, P&P throttle body, and GTP 36# injectors.

          Comment

          • #6
            I bought a BD-11 kit for $1100 shipped with a GM master gasket set.

            However,

            if you would be interested I might be interested in some of the items in the kit.

            The Wide Band and sensor
            The FMU
            The Bearing kit

            Shoot me a price if you want. Thanks!

            Comment

            • #7
              For the wideband and adjustable FMU how does $250.00 sound ?
              I dont know about the bearings yet, I think I might want to keep those with the supercharger.
              I cut the wires for the wideband under the car to get it out easier all they would need is to be reconnected
              2002 v6 camaro supercharged with a powerdyne pushing 12PSI, I also have an aluminum driveshaft, headers, high flow CAT, flowmaster exhaust, HP Tuners, AEM wideband, throttle body spacer, PCV bypass, cartech adjustable FMU, timing control module (wich I don't need now with HP Tuners but I am not going to spend the time to take it out), 3.23s with LSD, Spec stage 2 clutch, Exon (I think that is how you spell it) Ground effects, P&P throttle body, and GTP 36# injectors.

              Comment

              • #8
                Can I get pics of the Wide band and FMU to b_schall20@hotmail.com? Thanks!

                Comment

                • #9
                  I sent some pics to your email directly from my cell phone, I could only send one pic per message
                  2002 v6 camaro supercharged with a powerdyne pushing 12PSI, I also have an aluminum driveshaft, headers, high flow CAT, flowmaster exhaust, HP Tuners, AEM wideband, throttle body spacer, PCV bypass, cartech adjustable FMU, timing control module (wich I don't need now with HP Tuners but I am not going to spend the time to take it out), 3.23s with LSD, Spec stage 2 clutch, Exon (I think that is how you spell it) Ground effects, P&P throttle body, and GTP 36# injectors.

                  Comment

                  Previous template Next
                  Working...
                  X