Announcement

Collapse
No announcement yet.

ProBuilt 700r4 + Converter

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • ProBuilt 700r4 + Converter

    Can be sold separately. Transmission setup to handle 625+HP according to ProBuilt.

    700r4 Transmission
    ProBuilt Rebuild Kit Included: (https://www.700r4l60e.com/store/prod...&cat=19&page=1)
    "Front Pump"
    Seal retainer
    Seal, late design
    Teflon bushing, late design
    10-vane rotor with vanes, slide, rotor guide & pin assembly
    Steel rings & priming spring (Trans-Go) above or below 5,500 rpm WOT shifts, please specify
    Intermediate/reverse boost valve .296
    Main boost valve .500
    New Stator support with wide bushings
    Heavy Duty input shaft checkball capsule for better torque converter lockup

    "Clutches, Steels And Pressure Plates"
    4 Borg-Warner reverse/input clutches .078
    4 Reverse/input "low drag" Turbulator steels .078
    1 Reverse waved steel (eliminates the belleville spring that tears up the inside of the drum)
    5 Borg-Warner forward clutches .070
    5 Forward steels .090
    2 Borg-Warner overrun clutches .078
    2 Overrun steels .091
    5 Low/reverse clutches, Borg-Warner .087
    5 Low/reverse steels, Turbulator .068
    8 3-4 clutches (Hi-Energy), Borg-Warner .080
    3 3-4 steels Kolene .060
    5 3-4 steels Kolene .080
    1 3-4 top pressure plate .128
    1 3-4 bottom pressure plate .128
    1 3-4 snap ring .062

    Borg Warner dual cage 29 element design input sprag
    Beast sunshell
    Trans-Go (Hi-Rev) replacement forward & 3-4 release springs (good up to 7,800 rpm)
    (Viton) Input/output shaft seal guarantees lube to the rear planets
    Borg-Warner (Hi-Energy) 2-4 band
    Corvette 2nd gear servo
    Borg-Warner Low/reverse roller assembly (late design)
    Paper & rubber (gasket) kit
    New governor gear
    Case connector 3 prong
    Transmission filter (OEM)
    Converter solenoid & governor filter
    Bushing kit with 3 teflon
    Thrust washer kit
    Sealing ring kit
    HD Torrington Bearing kit
    TransGo Shift kit (Street/Strip) w/accumulation for nice part throttle shifts
    Vamac 3 lip rear seal
    New forward accumulator piston
    Modified second accumulator piston
    New oem 2nd & 4th accumulator pins

    Torque Converter
    10.5" 3500 Stall from CkPerformance.com
    #7R4C/HPSB
    http://www.ckperformance.com/resourc...ONVERTERS.html

    Transmission has 2 passes at the track on it. 4,000 miles on it total.

    PM Me offers.


    '91 Firebird - LC2 3.8, 6776S Turbo, Alkycontrol, S60 Rear, ProBuilt 700

  • #2
    thats a stout trans, good luck with the sale.
    Doing less with more


    Comment


    • #3
      what kind of valve body does the trans have? does it require a tv cable?

      also is it setup up for above 5500rpm wot shifts?
      Steve.
      http://s270.photobucket.com/albums/j...monte%20carlo/

      Comment

      Working...
      X