Announcement

Collapse
No announcement yet.

Massive amount of 99 SS parts and many other misc parts.

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Massive amount of 99 SS parts and many other misc parts.

    MANY parts for sale. many LS1 and others.
    Alright I've had way to much of this stuff sitting around and now that I have my car done I have alot of parts left over. I also have some random parts for sale too.

    Unless otherwise stated all parts are off of a 1999 Camaro SS 6-speed with 43k miles.
    All prices are OBO and local-pick up preferred but willing to ship at buyers cost.

    Navy Blue Metallic passenger side door w/ window and mirror ~ $125.00
    Main Dash ~ $75
    Glove Box ~ $25
    Rear Hatch Plastic Trim Pieces ~ $10 each or $25 for all three.
    Wiper Arms ~ $20 each
    Hood and Hatch Actuators ~ $10 each
    Shock 6-speed Shifter ~ $20
    NIB OEM 69' Camaro Speakers ~ $30 each
    Full Interior and Chassis Wiring Harness ~ make offer
    SS Shocks ~ $150 for all 4
    AC Accumulator and several AC lines ~ Make offer
    Brake Master Cylinder w/ lines and reservoir ~ $40
    Silver ZR-1 bow-tie center caps NIB ~ $15 each or $45 for all 4
    Small Block Chevy polished plug wire looms ~ $40
    LS1 Coolant Crossover pipe ~ $15
    Transmission Tailshaft Exhaust Bracket ~ $10
    Rear Hatch Lock and Actuator ~ $25
    Fuel Tank ~ $75
    EVAP Canister ~ $35
    Brake Booster ~ $35
    Passenger Taillight ~ $30
    Automatic Shifter from 01 Camaro SS ~ $40
    Automatic Pedal Assembly 01' Camaro SS ~ $30
    Wheel Bearings w/ ABS sensor ~ $45
    Ignition Switch ~ $25
    Stock Manifolds ~ $30 Each or $50 for both
    Catalic Converters and Y-pipe ~ $125
    Post-cat HO2S ~ $25 each
    Lower A-arms w/ bushings ~ $30 each
    Upper A-arms w/ bushings ~ $25 each
    Steering Knuckle Right only ~ $30
    Power Steering Intercooler/ Lower Radiator Hose ~ SOLD
    Stock Trunk Jack ~ $20
    EGR Pipes and EGR Valve ~ Make offer
    ABS Module ~ $50
    6-Speed Transmission Cross-member ~ $30
    SLP Front License-Plate Bracket ~ $25
    Thermostat ~ $15
    LS1 Valley Cover ~ 35
    Eibach Pro-kit Springs 1K miles ~ SOLD
    Stock Rear Springs ~ $35
    Stock 5-speed shifter from 97 RS ~ $15
    Gauge Cluster Bezel ~ $15
    Drivers Side Kick Panel and Trunk Release Switch ~ $20
    Lower Plastic Kick Panel ~ $10
    Plastic Door Sille ~ $10
    All Weather Stripping (door, t-tops, hatch, ect...) ~ Make Offer will sell separately
    SS Sway Bar Front ~ $50
    SS Sway Bar rear ~ $25
    Coilover shocks and springs from Factory Five Cobra Kit car BRAND NEW (will get
    dimensions on length, could use on anything) ~ Make Offer
    2010 Camaro SS stock Mufflers w/ chrome tips ~ Make Offer
    4.0 Jeep Inline-6 Intake Manifold, Fuel Rail, and Injectors ~ $30

    Open to some trades or partial trades. Pictures of everything available.
    I have this posted on here, craigslist, and ls1tech. First come first serve.

    ALSO: These are ALL the parts I have, please don't respond asking for the engine, seats, hood, brakes...ect

    Respond here, PM me, call or text at 586-838-8272, or e-mail at mrhodes17@yahoo.com

    Thanks,
    Mike
    Last edited by 99SSRhodes; June 13th, 2010, 12:31 PM. Reason: update
    -Mike
    Chevrolet Technician

    Totaled 99 SS swapped drivetrain, harness, interior, and suspension into 94 Z28.


  • #2
    Does the hatch actuator have the plastic mounting piece? If so I would like to buy that.
    The Chevy Camaro was built with a single purpose in mind which it executes flawlessly...Going very very fast in a straight line until your hair catches on fire.



    Comment


    • #3
      PM sent on the eibachs
      1999 z28 Bright Blue Metallic 1 of 10
      1999 z28 Hugger Orange RS 1 of >309 (Sold)
      1997 z28 White 6 speed Heads and Cam. (Sold)
      1994 z28 PPM auto Cam only (Sold)
      1984 sport coupe red 4 cyl (Sold)

      Comment


      • #4
        I'm looking for front calipers, brackets and rotors.

        Comment


        • #5
          mike does those front struts have springs? also do you have the rear springs? also do you have the front plastic gray piece that attaches to the bumper with black push pins and bolts to the car above the washer resivior
          Last edited by Virtue; June 7th, 2010, 10:08 PM.
          sigpic
          The LS1 or Go Home Crew

          ASE master certified
          1998 Camarbo z28-going back to stock
          11.3@121 old heads & cam setup




          Comment


          • #6
            Originally posted by SlipStreamZ28 View Post
            Does the hatch actuator have the plastic mounting piece? If so I would like to buy that.
            I will check exactly what it has on it tomorrow when i get off work.

            Originally posted by Purple94Z28 View Post
            PM sent on the eibachs
            PM replied

            Originally posted by TB2 View Post
            I'm looking for front calipers, brackets and rotors.
            Sorry I don't have any of those.

            Originally posted by Virtue View Post
            mike does those front struts have springs? also do you have the rear springs? also do you have the front plastic gray piece that attaches to the bumper with black push pins and bolts to the car above the washer resivior
            No springs with the front shocks, I have a set of stock rear SS spring and a full set of eibach pro-kit springs. I don't have the front plastic piece. Let me know if your interested in anything.

            Thanks,
            Mike
            -Mike
            Chevrolet Technician

            Totaled 99 SS swapped drivetrain, harness, interior, and suspension into 94 Z28.

            Comment


            • #7
              Couple things,

              Very possibly interested in the springs and shocks. Are the shocks factory decarbons or I know some cars ended up with blue and yellow bilsteins?

              Second, this is a biggie. Do you have the engine BAY harness? Is it different from autos to manuals? I need this harness because it has the hookup for cruise control, im still using my old v6 harness which was electronic throttle control, so there was no cruise box.

              EDIT, also, is there any way you could get me the info we discussed at the meet and greet regarding my oil consumption?
              1999 Camaro - 6 liters of fury.....

              Comment


              • #8
                is the interior harness auto or stick?
                i am interested in the pedals and shifter

                Comment


                • #9
                  Originally posted by sman View Post
                  Couple things,

                  Very possibly interested in the springs and shocks. Are the shocks factory decarbons or I know some cars ended up with blue and yellow bilsteins?

                  Second, this is a biggie. Do you have the engine BAY harness? Is it different from autos to manuals? I need this harness because it has the hookup for cruise control, im still using my old v6 harness which was electronic throttle control, so there was no cruise box.

                  EDIT, also, is there any way you could get me the info we discussed at the meet and greet regarding my oil consumption?
                  shocks ar factory SS decarbons they are orange. the short engine harness i do not have other than that i have the chassie/engine bay harness and the interior harness. I'll PM you that oil consumption info

                  Originally posted by 1BADAIR View Post
                  is the interior harness auto or stick?
                  i am interested in the pedals and shifter
                  interior harness is manual. I still have the auto pedals and shifter if you want them.
                  -Mike
                  Chevrolet Technician

                  Totaled 99 SS swapped drivetrain, harness, interior, and suspension into 94 Z28.

                  Comment


                  • #10
                    Is your auto shifter the whole shifter assembly or just the knob? Thanks
                    1996 Trans Am WS6 - long term project


                    Comment


                    • #11
                      Mike do you still have the car you are parting out or do you just have the parts?
                      sigpic
                      And another thing.....when I gun the motor, I want the whole world to think it's coming to an end.
                      -Homer Simpson

                      Comment


                      • #12
                        Originally posted by jetice91 View Post
                        Is your auto shifter the whole shifter assembly or just the knob? Thanks
                        The whole assembly.
                        -Mike
                        Chevrolet Technician

                        Totaled 99 SS swapped drivetrain, harness, interior, and suspension into 94 Z28.

                        Comment


                        • #13
                          Originally posted by 1bad83ta View Post
                          Mike do you still have the car you are parting out or do you just have the parts?
                          just the parts listed.
                          thanks, mike
                          -Mike
                          Chevrolet Technician

                          Totaled 99 SS swapped drivetrain, harness, interior, and suspension into 94 Z28.

                          Comment


                          • #14
                            Mike, so you have the engine bay harness? Was it different between autos and sticks? You didnt have traction control right?
                            1999 Camaro - 6 liters of fury.....

                            Comment


                            • #15
                              if you"ll sell me just the front struts pm me i can grab them this weekend,if not ill just buy em at work

                              thanks!
                              sigpic
                              The LS1 or Go Home Crew

                              ASE master certified
                              1998 Camarbo z28-going back to stock
                              11.3@121 old heads & cam setup




                              Comment

                              Working...
                              X