LT1 P600B Procharger kit

[prorac1]

For sale is a P600B Procharger kit for a 1992 to 1997 LT1. It comes complete with the exception of the elbow to the throttle body (I used my stock one). It also comes with a boost guage. I made custom intercooler mounts to raise the intercooler farther from the ground for ground clearance. This requires you to remove the sway bar or extend the mounts to put the intercooler below the swaybar. This procharger is not self contained, meaning it requires oil lines, which are supplied along with the distribution block that threads into the block just above the oil filter. It comes with the fuel management unit, but I did not use it. Instead I used 42 lb injector (which are also supplied in this package) and reprogramed the computer to compensate for reduced timing and increasing the fuel. It also comes with directions from procharger. The only problem with this kit is the oil fitting in the side of the headunit is brass and broke. It is a part you would have to get from procharger. I took this off of my car because im planing on building a large cubic inch N/A set up. The headunit was rebuilt just before I got it, and I used it for appox. 5000 miles with no problems. $1600 obo. Thanks for looking. Eric L

[meissen]

Ugh I wish I didn't have responsibilities cause I have the money for that right now...

[prorac1]

I would even tune it for you. I had it set up as a blow through set up. I had a wide band hooked to it and had a perfect AFR. I even drove it this summer 40 miles one way to work. My wife would drive the WHEELS off of it. It was funny, she would pull into the gas station, and the place would go nuts, lol. A blonde chick in a shiney red SS camaro with a horrific whine. (Yes, it sounds like the hounds of hell when breathing through the blow off, lol). People in the know would go, SWEET, A BLOWER. People who didnt would ask why such a nice car had a belt squeel, lol. Eric L

[phoenix_rising]

How much would be involved adapting this to a V6 car?

[prorac1]

I would think you would need a differant bracket to mount it to the motor, and differant injectors. I wouldnt think anything more than that. Eric L

[prorac1]

TTT, make an offer. We got other pieces to buy, get it out of here. Eric L

[chattersonm]

hey would you be willing to go to 1300? if so, is it an easy hookup onto the vehicle and how much would it cost to get that broke peice? i wanna see if i can do this one myself or not lol

[prorac1]

I will let it go for $1500 dollars. And the install was cake. As a matter of fact I would even help ya do it since your in Grand Rapids. I havent researched how much the piece is, but I wa told around $80.00 when I was asking around. I would also help ya tune it if you want. Normally I would slash the price because of the broken part, but becuase of all the extras thrown in with the kit (braided supply line, braided -10 return line, tighter intercooler mounting brackets, boost guage, and the SVO 42lb injectors) I feel the price is not far off. Let me know what your thinkin. Eric L

[gary]

PM sent

[prorac1]

pm replied

[prorac1]

Ttt

[prorac1]

SOLD!!!! Thank you Mifbody. Eric L

[meissen]

Congrats on the sale, Eric! Someone got a good deal!

[phoenix_rising]

Congrats! Enjoy it!

[DETROITMUSCLE]

who bought it???