Announcement

Collapse
No announcement yet.

A lot of 4th Gen Stuff Good Prices

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    the leather boots aren't ripped anywhere are they? almost like one is in one of those pictures but I'm not sure exactly how it attaches. And do they match the grey leather? I still would like to purchase those and the panhard bar if everything checks out. I have paypal ready.
    -Derek-
    1999 Pontiac Trans Am Ram Air- Lots of Boltons..

    Comment


    • #17
      you still in royal oak? i can come grab them this week for sure. pic of the muffler& cutout by chance?
      sigpic
      The LS1 or Go Home Crew

      ASE master certified
      1998 Camarbo z28-going back to stock
      11.3@121 old heads & cam setup




      Comment


      • #18
        Originally posted by redfbird99 View Post
        the leather boots aren't ripped anywhere are they? almost like one is in one of those pictures but I'm not sure exactly how it attaches. And do they match the grey leather? I still would like to purchase those and the panhard bar if everything checks out. I have paypal ready.
        The top of the shifter boot isnt ripped the stitching was cut so it would overlap a little onto the shift knob. The e brake boot has some dryed hot glue where it was stuck on. Not perfect but stuff you wont see when installed. Thats why its $20 for the set
        2011 Ford Raptor SuperCrew
        SVT Beadlock Wheels
        Roush Intake, Corsa Exhaust
        20" and 40" Light Bars

        2000 Camaro Z28
        Stripped Down Drag Car Build

        Project 1999 Camaro Z28


        2009 G8 GT Stryker Blue Metallic-SHEGONE
        Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
        RotoFab Intake, HSRK, Camaro Trans Pan
        ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
        Pat G - 93 Octane Tune
        Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
        CTS-V Calipers, Brembo Pads
        H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
        HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

        2.55 Lingenfelter Pulley and Injectors waiting to go on!
        sigpic

        Comment


        • #19
          Originally posted by Syn View Post
          you still in royal oak? i can come grab them this week for sure. pic of the muffler& cutout by chance?
          Still in Royal Oak. Pics of the muffler are in an older post titles s.reef consolidation thread. The cut out is in great condition. It is slightly discolored from the heat though
          2011 Ford Raptor SuperCrew
          SVT Beadlock Wheels
          Roush Intake, Corsa Exhaust
          20" and 40" Light Bars

          2000 Camaro Z28
          Stripped Down Drag Car Build

          Project 1999 Camaro Z28


          2009 G8 GT Stryker Blue Metallic-SHEGONE
          Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
          RotoFab Intake, HSRK, Camaro Trans Pan
          ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
          Pat G - 93 Octane Tune
          Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
          CTS-V Calipers, Brembo Pads
          H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
          HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

          2.55 Lingenfelter Pulley and Injectors waiting to go on!
          sigpic

          Comment


          • #20
            Originally posted by s.reef View Post
            The top of the shifter boot isnt ripped the stitching was cut so it would overlap a little onto the shift knob. The e brake boot has some dryed hot glue where it was stuck on. Not perfect but stuff you wont see when installed. Thats why its $20 for the set
            works for me. Do they match the grey leather pretty decent? looks like they are a touch darker in pictures but that could be because of the texture. Shoot me a PM for a total when you see how much the panhard rod is.
            -Derek-
            1999 Pontiac Trans Am Ram Air- Lots of Boltons..

            Comment


            • #21
              I had the charcoal gray interior and it looked great you can see some pics of them installed in my gallery shooting you a pm right now
              2011 Ford Raptor SuperCrew
              SVT Beadlock Wheels
              Roush Intake, Corsa Exhaust
              20" and 40" Light Bars

              2000 Camaro Z28
              Stripped Down Drag Car Build

              Project 1999 Camaro Z28


              2009 G8 GT Stryker Blue Metallic-SHEGONE
              Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
              RotoFab Intake, HSRK, Camaro Trans Pan
              ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
              Pat G - 93 Octane Tune
              Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
              CTS-V Calipers, Brembo Pads
              H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
              HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

              2.55 Lingenfelter Pulley and Injectors waiting to go on!
              sigpic

              Comment


              • #22
                hows the paint on the strut tower brace
                my friend seems interested
                sigpic

                1996 Base Model
                +2 cylinder mod

                Comment


                • #23
                  Originally posted by jderry View Post
                  hows the paint on the strut tower brace
                  my friend seems interested
                  Its used so the there is a little rust were the bolts were and some nicks and scratches here and there
                  2011 Ford Raptor SuperCrew
                  SVT Beadlock Wheels
                  Roush Intake, Corsa Exhaust
                  20" and 40" Light Bars

                  2000 Camaro Z28
                  Stripped Down Drag Car Build

                  Project 1999 Camaro Z28


                  2009 G8 GT Stryker Blue Metallic-SHEGONE
                  Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                  RotoFab Intake, HSRK, Camaro Trans Pan
                  ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                  Pat G - 93 Octane Tune
                  Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                  CTS-V Calipers, Brembo Pads
                  H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                  HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                  2.55 Lingenfelter Pulley and Injectors waiting to go on!
                  sigpic

                  Comment


                  • #24
                    If the strut tower brace fits my t/a I will take it
                    burn rubber!

                    Comment


                    • #25
                      sent you a pm adam
                      2011 Ford Raptor SuperCrew
                      SVT Beadlock Wheels
                      Roush Intake, Corsa Exhaust
                      20" and 40" Light Bars

                      2000 Camaro Z28
                      Stripped Down Drag Car Build

                      Project 1999 Camaro Z28


                      2009 G8 GT Stryker Blue Metallic-SHEGONE
                      Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                      RotoFab Intake, HSRK, Camaro Trans Pan
                      ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                      Pat G - 93 Octane Tune
                      Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                      CTS-V Calipers, Brembo Pads
                      H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                      HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                      2.55 Lingenfelter Pulley and Injectors waiting to go on!
                      sigpic

                      Comment


                      • #26
                        List updated
                        2011 Ford Raptor SuperCrew
                        SVT Beadlock Wheels
                        Roush Intake, Corsa Exhaust
                        20" and 40" Light Bars

                        2000 Camaro Z28
                        Stripped Down Drag Car Build

                        Project 1999 Camaro Z28


                        2009 G8 GT Stryker Blue Metallic-SHEGONE
                        Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                        RotoFab Intake, HSRK, Camaro Trans Pan
                        ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                        Pat G - 93 Octane Tune
                        Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                        CTS-V Calipers, Brembo Pads
                        H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                        HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                        2.55 Lingenfelter Pulley and Injectors waiting to go on!
                        sigpic

                        Comment


                        • #27
                          Originally posted by redfbird99 View Post
                          I'll take the panhard bar and leather shifter and emergency brake boots pending pictures, let me know! How much would you add for shipping because I'm not local? Unless someone is making a trip from the east side to Allendale sometime soon?~
                          I wish this thread was up friday! I was down there geting my headers and I would have been happy to buy some stuff. I wouldnt mind the floor mats but I dont want to drive all the way back down there and spend as much in gas as I would just for the mats. Probably would take the cutout too. Whenm are you going back to school? would you be willing to meet somewhere on your way back up?
                          Here's a sig with my old ride: (Everyone else has a cool sig I had to do something!)

                          sigpic

                          Comment


                          • #28
                            If you pay for shipping ill ship. I transfered to walsh so I wont be up there anytime soon
                            2011 Ford Raptor SuperCrew
                            SVT Beadlock Wheels
                            Roush Intake, Corsa Exhaust
                            20" and 40" Light Bars

                            2000 Camaro Z28
                            Stripped Down Drag Car Build

                            Project 1999 Camaro Z28


                            2009 G8 GT Stryker Blue Metallic-SHEGONE
                            Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                            RotoFab Intake, HSRK, Camaro Trans Pan
                            ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                            Pat G - 93 Octane Tune
                            Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                            CTS-V Calipers, Brembo Pads
                            H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                            HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                            2.55 Lingenfelter Pulley and Injectors waiting to go on!
                            sigpic

                            Comment


                            • #29
                              Don't suppose u would meet in auburn hills?
                              Here's a sig with my old ride: (Everyone else has a cool sig I had to do something!)

                              sigpic

                              Comment


                              • #30
                                i could meet you in auburn hills in the next few days
                                2011 Ford Raptor SuperCrew
                                SVT Beadlock Wheels
                                Roush Intake, Corsa Exhaust
                                20" and 40" Light Bars

                                2000 Camaro Z28
                                Stripped Down Drag Car Build

                                Project 1999 Camaro Z28


                                2009 G8 GT Stryker Blue Metallic-SHEGONE
                                Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                                RotoFab Intake, HSRK, Camaro Trans Pan
                                ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                                Pat G - 93 Octane Tune
                                Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                                CTS-V Calipers, Brembo Pads
                                H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                                HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                                2.55 Lingenfelter Pulley and Injectors waiting to go on!
                                sigpic

                                Comment

                                Working...
                                X