Announcement

Collapse
No announcement yet.

A lot of 4th Gen Stuff Good Prices

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • A lot of 4th Gen Stuff Good Prices

    Here it goes: Pics up later tonight or tomorrow morning

    Set of Stock Springs from a 95 Z28 Decent Condition little rust $20 for the set

    2002 SS Leather Seats Front and Rear
    Driver side has bolster wear a 1/2 inch slit on the top section and two small tears on the bottom part of the seat, all other seats in great condition. Come with power bracket for driver side and manual bracket for passenger side. $300 firm

    93-97 Camaro Tail lights Nightshaded -$30 for the pair

    Hooker Aerochamber Muffler with some exhaust piping attached -$20

    Added Billet Grille for 93-97 Camaros needs a polishing -$15

    Pics to come soon. First come first serve. I will meet very close by to Royal Oak thanks!
    Last edited by s.reef; August 16th, 2009, 06:42 PM.
    2011 Ford Raptor SuperCrew
    SVT Beadlock Wheels
    Roush Intake, Corsa Exhaust
    20" and 40" Light Bars

    2000 Camaro Z28
    Stripped Down Drag Car Build

    Project 1999 Camaro Z28


    2009 G8 GT Stryker Blue Metallic-SHEGONE
    Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
    RotoFab Intake, HSRK, Camaro Trans Pan
    ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
    Pat G - 93 Octane Tune
    Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
    CTS-V Calipers, Brembo Pads
    H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
    HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

    2.55 Lingenfelter Pulley and Injectors waiting to go on!
    sigpic

  • #2
    is it just the cutout or an E cutout?
    Thanks
    sigpic

    1996 Base Model
    +2 cylinder mod

    Comment


    • #3
      I'll take the panhard bar and leather shifter and emergency brake boots pending pictures, let me know! How much would you add for shipping because I'm not local? Unless someone is making a trip from the east side to Allendale sometime soon?~
      -Derek-
      1999 Pontiac Trans Am Ram Air- Lots of Boltons..

      Comment


      • #4
        Originally posted by jderry View Post
        is it just the cutout or an E cutout?
        Thanks
        For $20 just the cutout
        2011 Ford Raptor SuperCrew
        SVT Beadlock Wheels
        Roush Intake, Corsa Exhaust
        20" and 40" Light Bars

        2000 Camaro Z28
        Stripped Down Drag Car Build

        Project 1999 Camaro Z28


        2009 G8 GT Stryker Blue Metallic-SHEGONE
        Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
        RotoFab Intake, HSRK, Camaro Trans Pan
        ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
        Pat G - 93 Octane Tune
        Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
        CTS-V Calipers, Brembo Pads
        H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
        HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

        2.55 Lingenfelter Pulley and Injectors waiting to go on!
        sigpic

        Comment


        • #5
          Originally posted by redfbird99 View Post
          I'll take the panhard bar and leather shifter and emergency brake boots pending pictures, let me know! How much would you add for shipping because I'm not local?
          Id have to see what they charge for the panhard bar to ship.
          2011 Ford Raptor SuperCrew
          SVT Beadlock Wheels
          Roush Intake, Corsa Exhaust
          20" and 40" Light Bars

          2000 Camaro Z28
          Stripped Down Drag Car Build

          Project 1999 Camaro Z28


          2009 G8 GT Stryker Blue Metallic-SHEGONE
          Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
          RotoFab Intake, HSRK, Camaro Trans Pan
          ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
          Pat G - 93 Octane Tune
          Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
          CTS-V Calipers, Brembo Pads
          H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
          HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

          2.55 Lingenfelter Pulley and Injectors waiting to go on!
          sigpic

          Comment


          • #6
            Originally posted by s.reef View Post
            Id have to see what they charge for the panhard bar to ship.
            the pain is that its so long. I shipped one via UPS a while back when parting out my old car and I think it was like 7-8 bucks for shipping. Might be easier to just saran wrap it or something and take it to the post office for a lot cheaper first class mail.
            -Derek-
            1999 Pontiac Trans Am Ram Air- Lots of Boltons..

            Comment


            • #7
              Originally posted by s.reef View Post
              For $20 just the cutout
              lol being hopeful
              sigpic

              1996 Base Model
              +2 cylinder mod

              Comment


              • #8
                im going to guess the leather seats are also black? i have a tan interior. hard to find tan leather 4th gen seats in decent condition.
                wishing i could drive like joe and the atm squad

                Comment


                • #9
                  Ok here are some pics
                  Attached Files
                  2011 Ford Raptor SuperCrew
                  SVT Beadlock Wheels
                  Roush Intake, Corsa Exhaust
                  20" and 40" Light Bars

                  2000 Camaro Z28
                  Stripped Down Drag Car Build

                  Project 1999 Camaro Z28


                  2009 G8 GT Stryker Blue Metallic-SHEGONE
                  Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                  RotoFab Intake, HSRK, Camaro Trans Pan
                  ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                  Pat G - 93 Octane Tune
                  Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                  CTS-V Calipers, Brembo Pads
                  H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                  HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                  2.55 Lingenfelter Pulley and Injectors waiting to go on!
                  sigpic

                  Comment


                  • #10
                    forgot billet grille needs polishing $20 and a fire extinguisher $15
                    Attached Files
                    2011 Ford Raptor SuperCrew
                    SVT Beadlock Wheels
                    Roush Intake, Corsa Exhaust
                    20" and 40" Light Bars

                    2000 Camaro Z28
                    Stripped Down Drag Car Build

                    Project 1999 Camaro Z28


                    2009 G8 GT Stryker Blue Metallic-SHEGONE
                    Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                    RotoFab Intake, HSRK, Camaro Trans Pan
                    ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                    Pat G - 93 Octane Tune
                    Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                    CTS-V Calipers, Brembo Pads
                    H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                    HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                    2.55 Lingenfelter Pulley and Injectors waiting to go on!
                    sigpic

                    Comment


                    • #11
                      Originally posted by MunsterZ28 View Post
                      im going to guess the leather seats are also black? i have a tan interior. hard to find tan leather 4th gen seats in decent condition.
                      swap to gray I got a lot of pieces you can have if you buy my seats
                      2011 Ford Raptor SuperCrew
                      SVT Beadlock Wheels
                      Roush Intake, Corsa Exhaust
                      20" and 40" Light Bars

                      2000 Camaro Z28
                      Stripped Down Drag Car Build

                      Project 1999 Camaro Z28


                      2009 G8 GT Stryker Blue Metallic-SHEGONE
                      Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                      RotoFab Intake, HSRK, Camaro Trans Pan
                      ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                      Pat G - 93 Octane Tune
                      Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                      CTS-V Calipers, Brembo Pads
                      H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                      HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                      2.55 Lingenfelter Pulley and Injectors waiting to go on!
                      sigpic

                      Comment


                      • #12
                        sorry those seats arnt tan, dang. i know joe (pwnder) will prob take those ttops. his friend lost one going down the road the other day. started raining and he rushed and didnt lock the driver side. ill text him right now to let him know.


                        amazing deal considering gm wants $1000 for one and our cost as gm employees is $700 wtfff
                        wishing i could drive like joe and the atm squad

                        Comment


                        • #13
                          Originally posted by s.reef View Post
                          swap to gray I got a lot of pieces you can have if you buy my seats

                          even carpet and door panels?? lol


                          and im trying to get ahold of joe to sell the ttops hes not responding sorry


                          EDIT: you have a pm bout ttops
                          Last edited by MunsterZ28; August 1st, 2009, 09:51 PM.
                          wishing i could drive like joe and the atm squad

                          Comment


                          • #14
                            what size is the muffler and cutout?
                            sigpic
                            The LS1 or Go Home Crew

                            ASE master certified
                            1998 Camarbo z28-going back to stock
                            11.3@121 old heads & cam setup




                            Comment


                            • #15
                              Originally posted by Syn View Post
                              what size is the muffler and cutout?
                              3" Cutout

                              Muffler is 3" Inlet and two 2.5 outlets
                              2011 Ford Raptor SuperCrew
                              SVT Beadlock Wheels
                              Roush Intake, Corsa Exhaust
                              20" and 40" Light Bars

                              2000 Camaro Z28
                              Stripped Down Drag Car Build

                              Project 1999 Camaro Z28


                              2009 G8 GT Stryker Blue Metallic-SHEGONE
                              Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                              RotoFab Intake, HSRK, Camaro Trans Pan
                              ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                              Pat G - 93 Octane Tune
                              Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                              CTS-V Calipers, Brembo Pads
                              H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                              HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                              2.55 Lingenfelter Pulley and Injectors waiting to go on!
                              sigpic

                              Comment

                              Working...
                              X