Tweet
me and a friend of mine both finished engine builds on 2 Camaro's so we have too many leftover stock and aftermarket parts laying around. so here i am going to list majority of the parts: call Dave a (586)996-1300
2 sets of cast iron heads about 100k on one set about 140k on the other set (first come first serve) 20.00 each (they come with valve springs)
2 stock LT1 intakes 20.00 each
1 fuel rail with stock injectors 5.00
2 accessory brackets 5.00 each
1 water pump (did not leak when removed)
3 camshafts (1 in decent shape, other 2 not in the greatest but still usable) 5.00 each
1 set of valve covers 5.00
1 stock coil blaster 5.00
1 355 block bored .30 over spun a bearing and needs machine work only 3500 on block and crank (comes with aftermarket eagle crank) 60.00
1 1994 lt1 A4 Camaro ecu 40.00
1 Bosch starter looks brand new very low miles 30.00
1 stock set of LT1 pistons and rods and stock crank altogether 40.00 (will separate if needed)
a bunch of stock push rods 10.00 for a set of 16
2 timing chain covers (1 cover has really nice seals still) 5.00 each (first come first serve)
1 crank pulley 100k on it 5.00
majority of these stock parts have 90k to 140k on them so just ask i should be able to tell you
AFTERMARKET PARTS:
1 trans cooler (no part # on it but was going to be used for a 1994 camaro brand new never used 40.00
1 set of aftermarket push rods (no part number as well but purchased them and realized they were too short never used 40.00
1 set of performance Crane Cams aftermarket valve springs still in box part # CRN-11309-1 new on summit for 199.99 will sell for 75.00
these are the parts i can find as of now if there is something in particular you may be looking for there is a very good chance i have it so please call and i will sell it for incredibly cheap as you can see i need this stuff gone asap: if this stuff doesn't sell in the next 10-15 days it is all going to the scrap yard or metal return, majority of these prices are firm because they are so incredibly cheap.
I am very busy and work about 7 days a week so please do not e-mail me just call/text or leave a message if i do not pick up and i will work out a time to sell the stuff to you. please do not waste my time i need this stuff gone!! my number is (586)996-1300 thank you (you can call anytime)
just a heads up I have been very busy lately and I recommend if you really want one of these parts call before messaging me on here because it may not be for a few days until i can check this: thanks
2 sets of cast iron heads about 100k on one set about 140k on the other set (first come first serve) 20.00 each (they come with valve springs)
2 stock LT1 intakes 20.00 each
1 fuel rail with stock injectors 5.00
2 accessory brackets 5.00 each
1 water pump (did not leak when removed)
3 camshafts (1 in decent shape, other 2 not in the greatest but still usable) 5.00 each
1 set of valve covers 5.00
1 stock coil blaster 5.00
1 355 block bored .30 over spun a bearing and needs machine work only 3500 on block and crank (comes with aftermarket eagle crank) 60.00
1 1994 lt1 A4 Camaro ecu 40.00
1 Bosch starter looks brand new very low miles 30.00
1 stock set of LT1 pistons and rods and stock crank altogether 40.00 (will separate if needed)
a bunch of stock push rods 10.00 for a set of 16
2 timing chain covers (1 cover has really nice seals still) 5.00 each (first come first serve)
1 crank pulley 100k on it 5.00
majority of these stock parts have 90k to 140k on them so just ask i should be able to tell you
AFTERMARKET PARTS:
1 trans cooler (no part # on it but was going to be used for a 1994 camaro brand new never used 40.00
1 set of aftermarket push rods (no part number as well but purchased them and realized they were too short never used 40.00
1 set of performance Crane Cams aftermarket valve springs still in box part # CRN-11309-1 new on summit for 199.99 will sell for 75.00
these are the parts i can find as of now if there is something in particular you may be looking for there is a very good chance i have it so please call and i will sell it for incredibly cheap as you can see i need this stuff gone asap: if this stuff doesn't sell in the next 10-15 days it is all going to the scrap yard or metal return, majority of these prices are firm because they are so incredibly cheap.
I am very busy and work about 7 days a week so please do not e-mail me just call/text or leave a message if i do not pick up and i will work out a time to sell the stuff to you. please do not waste my time i need this stuff gone!! my number is (586)996-1300 thank you (you can call anytime)
just a heads up I have been very busy lately and I recommend if you really want one of these parts call before messaging me on here because it may not be for a few days until i can check this: thanks
great prices!
Comment