Announcement

Collapse
No announcement yet.

FS: Audio, v6 Jet Chip, and Dynomax catback

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FS: Audio, v6 Jet Chip, and Dynomax catback

    I have some stuff I want to get rid of, and I thought I'd help you out by selling it, and you'd help me out by buying it.
    I used all parts and can verify they work great.
    Paypal is preferred, money order and personal checks accepted also.
    FYI- I'm extremely open to trades, so don't be shy- just ask.
    (Looking for core PCM compatible with 2001 v6 Camaro, injectors, spark plugs, and gasket sets in particular, but feel free to ask about whatever)


    Jet Chip Stage II #10119S. Goes for $330 online - $50 Shipped
    -2000-2002 V6 Camaro (Auto only)
    -2000-2002 V6 Firebird (Auto only)
    -Installation is just a socket and a screwdriver away: pull PCM screw with a 7mm (I Think) socket, plug in chip, tighten screw with a flat-head screwdriver, and re-screw PCM.
    -The only thing "wrong" with the chip is the plastic that holds the pins is milky and has a few spider cracks, presumably from over-tightening. It still works great and the cracked plastic is protected from the weather, where it won't be a problem.

    Subthump.com Driver's side 10" charcoal Sub box. Goes for $112 online - $100 Shipped
    -fits any '93-'02 F-Body
    -.6 Ft^3


    Rockford Fosgate 10" Punch HX2 model RFD2210- $100 Shipped[/b]
    -Used with the subthump box.
    -Recommended sealed box volume -.2-.75 Ft^3
    -Dual 4 Ohm voice coils
    -Santoprene Surround
    -LX Cast Basket
    -Hyper extend aero-vent pole
    -3.0" Voice Coil
    -500 Watts RMS, 1000 Watts Peak
    -.55" XMax

    I wired this up with my amp at 8 Ohms, 480 Watts RMS and it sounded awesome.

    Rockford Fosgate 800.2 Amp - $150 Shipped
    -Factory refurbished
    -2 Channel
    -960W MONO @ 4 Ohms
    -480 W x2 @ 2 Ohms
    -240 W x2 @ 4 Ohms

    The only thing "wrong" with it is one of the holes for mounting the end caps is stripped. 2 minutes with a die and a slightly larger screw (or just a dab of superglue) and it's good as new. I just want to be honest with you guys, so you know exactly what you're getting.

    Dynomax Super-Turbo catback for 4th gen v6 (with hi-flo cat) $75 picked up
    -2.5" mandrel piping
    -1 in/ 2 out
    -2 slash cut stainless tips, non-rolled
    will have pics as weather allows.

    Thanks for looking!
    -Jared

    Jet Chip-


    Audio-
    Last edited by 01v6cmro; March 8th, 2009, 02:21 PM.
Working...
X