Tweet
Give me a few days on the stuff. In a week this car wil be disassembled and gone and all the parts will be in my garage ready to ship out. I cannot accept any money yet as they are still on the car, but in a week or sothey should all be ready to go. If your interested in parts at my asking price, i will place your name beside the part and you will be first in line. If you have an offer, i will put you in line accordingly with an *. Thanks!
ENGINE
Forged 347
LS6 block, stock crank, Diamond -1.6cc pistons, Callies Rods, Total Seal Rings, ARP hardware, ARP head stud kit, Patriot 6.0l 72cc heads with patriot dual gold valvesprings, custom comp cam, comp hardened pushrods, n-motion double roller timing set, ported ls6 oil pump, ls7 lifters, stock rockers, ls6 intake painted gloss black, valve covers painted gloss black. Complete Intake to oil pan, no accessories (CAN INCLUDE IF NEEDED!) Engine has great oil pressure and has just been broken in properly by EPP. Has only roughly 600 miles on it. Shortblock was built by Billy Briggs from W2W! CR is roughly 9.3:1 with the 72cc heads, can be an NA or nitrous motor with a simple head change.
-$6500
Twin Turbos
APS F-body Twin Turbo Kit. Roughly 600 miles on it. Made 666 RWHP/640 RWTQ on a mustang dyno @ 13 psi on a 347. Has the windshield washer tank modified as a meth tank for my snow stage 2 meth injection kit. Will come with the Snow Stage 2 meth injection. There is a MAF delete pipe with a bung for the meth nozzel welded in. Other than that it is exactly what you'd get from APS! Remember, you ALSO get the Snow meth injection kit with!
-$5500
BMR Tubular K-Member. Black Hammertone. What the APS kit was based around. Will not sell until the APS kit is sold. Only on the car for 600 miles.
-$350
ADD the BMR K to the APS kit for a total of $5800!
ELECTRONICS
Turbosmart Eboost-2 controller. White face with black bezel. Very little use, practically brand new, works like a champ, only had the main features hooked up, never got in depth with it but you can use it to also control a meth kit, trigger on a second fuel pump, do boost by RPM, etc etc, tons of features!
-$400
Autometer Phantom 2 1/16" WIDEBAND A/F guage with sensor. Had it in my guage pod with the sensor in my downpipe but never wired up the power or ground to the guage so its really never been used!
-$300
Autometer Phantom 2 1/16" Electronic Fuel Pressure guage. Has sending unit, been used with no issues!
-$150
Autometer Phantom 2 1/16" Mechanical Transmission Temp guage with sending unit. Used with no issues!
SOLD
Autometer triple pillar guage pod. Has been painted to match the factory graphite interior panels of my 99' Trans Am
SOLD
DRIVETRAIN
Fully Built 4l60-e trans. Has been all done up by Mike @ Vortech Converters. I don't know much about transmission but he does. He built this to handle my twin turbo project. Has roughly 600 miles on it and not a single issue. Shifts great and drives sooo smooth with all the bushings being replaced with bearings. Will come complete from bellhousing to tailhousing to oil pan with a bung welded in for trans temp sender.
-$1500
Yank SS 3600 Converter. Purchased used but Mike @ Vortech Converters flushed it out for me. No issues, hits hard and works great!
-$550
FUEL
Seimens flow matched 60# Injectors
-$300
Custom Dual Intank Walbro 255 set-up. Was done by EPP. The bucket has been modified for 2 WalbroGS340 pumps. Will be an exhange ONLY for your stock bucket with stock working pump or aftermarket.
-$350 plus your stock bucket and pump or $400 outright
If i think of anymore things i missed, i will add them later. Prices are without shipping. Would prefer to sell the engine/trans/turbo kit local but if your willing to pay shipping, i will consider.
The car is COMPLETE and running at the moment. Made 666 rwhp. If your interested in the car COMPLETE and running please PM me and i will cut you a good deal. Link to Car for sale with PICS.
http://ls1tech.com/forums/showthread.php?t=944669
I will not start tearing into the car until i get serious buyers and sell the aps kit or forged engine. If your interested in some of the smaller items, shoot me a PM and i will get back in touch with you in order of your inquires once the major components sell.
Here are 2 clips of the car running. Shows the great oil pressure and you can hear the engine/idle and a quick rev.
http://media.putfile.com/cold-start-36
http://media.putfile.com/Idle-and-Rev
ENGINE
Forged 347
LS6 block, stock crank, Diamond -1.6cc pistons, Callies Rods, Total Seal Rings, ARP hardware, ARP head stud kit, Patriot 6.0l 72cc heads with patriot dual gold valvesprings, custom comp cam, comp hardened pushrods, n-motion double roller timing set, ported ls6 oil pump, ls7 lifters, stock rockers, ls6 intake painted gloss black, valve covers painted gloss black. Complete Intake to oil pan, no accessories (CAN INCLUDE IF NEEDED!) Engine has great oil pressure and has just been broken in properly by EPP. Has only roughly 600 miles on it. Shortblock was built by Billy Briggs from W2W! CR is roughly 9.3:1 with the 72cc heads, can be an NA or nitrous motor with a simple head change.
-$6500
Twin Turbos
APS F-body Twin Turbo Kit. Roughly 600 miles on it. Made 666 RWHP/640 RWTQ on a mustang dyno @ 13 psi on a 347. Has the windshield washer tank modified as a meth tank for my snow stage 2 meth injection kit. Will come with the Snow Stage 2 meth injection. There is a MAF delete pipe with a bung for the meth nozzel welded in. Other than that it is exactly what you'd get from APS! Remember, you ALSO get the Snow meth injection kit with!
-$5500
BMR Tubular K-Member. Black Hammertone. What the APS kit was based around. Will not sell until the APS kit is sold. Only on the car for 600 miles.
-$350
ADD the BMR K to the APS kit for a total of $5800!
ELECTRONICS
Turbosmart Eboost-2 controller. White face with black bezel. Very little use, practically brand new, works like a champ, only had the main features hooked up, never got in depth with it but you can use it to also control a meth kit, trigger on a second fuel pump, do boost by RPM, etc etc, tons of features!
-$400
Autometer Phantom 2 1/16" WIDEBAND A/F guage with sensor. Had it in my guage pod with the sensor in my downpipe but never wired up the power or ground to the guage so its really never been used!
-$300
Autometer Phantom 2 1/16" Electronic Fuel Pressure guage. Has sending unit, been used with no issues!
-$150
Autometer Phantom 2 1/16" Mechanical Transmission Temp guage with sending unit. Used with no issues!
SOLD
Autometer triple pillar guage pod. Has been painted to match the factory graphite interior panels of my 99' Trans Am
SOLD
DRIVETRAIN
Fully Built 4l60-e trans. Has been all done up by Mike @ Vortech Converters. I don't know much about transmission but he does. He built this to handle my twin turbo project. Has roughly 600 miles on it and not a single issue. Shifts great and drives sooo smooth with all the bushings being replaced with bearings. Will come complete from bellhousing to tailhousing to oil pan with a bung welded in for trans temp sender.
-$1500
Yank SS 3600 Converter. Purchased used but Mike @ Vortech Converters flushed it out for me. No issues, hits hard and works great!
-$550
FUEL
Seimens flow matched 60# Injectors
-$300
Custom Dual Intank Walbro 255 set-up. Was done by EPP. The bucket has been modified for 2 WalbroGS340 pumps. Will be an exhange ONLY for your stock bucket with stock working pump or aftermarket.
-$350 plus your stock bucket and pump or $400 outright
If i think of anymore things i missed, i will add them later. Prices are without shipping. Would prefer to sell the engine/trans/turbo kit local but if your willing to pay shipping, i will consider.
The car is COMPLETE and running at the moment. Made 666 rwhp. If your interested in the car COMPLETE and running please PM me and i will cut you a good deal. Link to Car for sale with PICS.
http://ls1tech.com/forums/showthread.php?t=944669
I will not start tearing into the car until i get serious buyers and sell the aps kit or forged engine. If your interested in some of the smaller items, shoot me a PM and i will get back in touch with you in order of your inquires once the major components sell.
Here are 2 clips of the car running. Shows the great oil pressure and you can hear the engine/idle and a quick rev.
http://media.putfile.com/cold-start-36
http://media.putfile.com/Idle-and-Rev
I will have to check at the end of this month to see what damage I did on my credit card. Went a little crazy over the weekend. 
Comment