Tweet
Not mine but still very interesting...
http://www.fullthrottlev6.com/forums...ad.php?t=40674
complete 4.3 syclone/typhoon built engine and upgraded turbo system
got this on consignment:
I believe the thing was dropping oil pressure at some point in its past before i owned it. It was very low on oil when I got to putting a dipstick in it (did not have one cuz of the head conversion) I have been running it fairly hard recently and the noise shows up when cold.
I don't want to hurt anything so I have parked it for now.
Paperwork I have from prev. owner indicates that it was built by Turbotime.
Engine has approx 15,000 miles on it since rebuild
this is what is in the engine. the engine is still in the truck and you can come hear it, drive it etc if you are serious to purchase. i can give allpaperwork i have w/ the engine and turbo stuff to who would like to see it.
SRP pistons
Eagle rods
Balanced rotating assembly
4 bolt main conversion
ARP hardware
Vortec head and intake conversion
Comp cams 415 cam
It was very fast I feel it was maybe an 11.3 second truck 120+mph at 25# boost pump gas and methanol 21* timing 3900#. i run it with closed loop wideband control through a bs3 box.
the below is all of the other stuff i would be getting rid of in addition to the engine above.
vortec valvecovers
dipstick and tube fit and mounted
upper intake and throttlebody
aftermarket flexplate (tci?)
stock fan (and shroud)
Race Proven Motors air to air intercooler and piping
Precision Turbo PT-61 turbo with 3" inlet and 3" stainless downpipe cat delete pipe and cat converter
factory exhaust manifolds and crossover, wastegate actuator
3" ATR stainless catback exhaust
75# / hr injectors on stock fuel rails
recent water pump
CVR protorqe mini gear reduction starter
factory power steering pump, factory alternator, factory bracketry, ac delete, belt
motor mounts, oil pan, balancer
distributor w/ new module, spark plug wires
stock heater hoses, stock radiator hoses
msd 6a box (brand new), msd blaster coil (brand new), stock replacement coil (brand new)
misc box of bonus goodies i would be happy to give away along with the stuff (on pick up)
if you wanted the bs3 stand alone wriring harness for the v6 (not a stock computer plug bs3 adapter harness) i could let that go negotiable
pics/vids:
http://www.syty.net/forums/showthread.php?t=56351
this would be coming out for an lsx swap.
$5k you pick up 23060 near Richmond VA
my cell 804-314-7966 call w/ any questions or MIGHTYM0USE@comcast.net
__________________
http://www.fullthrottlev6.com/forums...ad.php?t=40674
complete 4.3 syclone/typhoon built engine and upgraded turbo system
got this on consignment:
I believe the thing was dropping oil pressure at some point in its past before i owned it. It was very low on oil when I got to putting a dipstick in it (did not have one cuz of the head conversion) I have been running it fairly hard recently and the noise shows up when cold.
I don't want to hurt anything so I have parked it for now.
Paperwork I have from prev. owner indicates that it was built by Turbotime.
Engine has approx 15,000 miles on it since rebuild
this is what is in the engine. the engine is still in the truck and you can come hear it, drive it etc if you are serious to purchase. i can give allpaperwork i have w/ the engine and turbo stuff to who would like to see it.
SRP pistons
Eagle rods
Balanced rotating assembly
4 bolt main conversion
ARP hardware
Vortec head and intake conversion
Comp cams 415 cam
It was very fast I feel it was maybe an 11.3 second truck 120+mph at 25# boost pump gas and methanol 21* timing 3900#. i run it with closed loop wideband control through a bs3 box.
the below is all of the other stuff i would be getting rid of in addition to the engine above.
vortec valvecovers
dipstick and tube fit and mounted
upper intake and throttlebody
aftermarket flexplate (tci?)
stock fan (and shroud)
Race Proven Motors air to air intercooler and piping
Precision Turbo PT-61 turbo with 3" inlet and 3" stainless downpipe cat delete pipe and cat converter
factory exhaust manifolds and crossover, wastegate actuator
3" ATR stainless catback exhaust
75# / hr injectors on stock fuel rails
recent water pump
CVR protorqe mini gear reduction starter
factory power steering pump, factory alternator, factory bracketry, ac delete, belt
motor mounts, oil pan, balancer
distributor w/ new module, spark plug wires
stock heater hoses, stock radiator hoses
msd 6a box (brand new), msd blaster coil (brand new), stock replacement coil (brand new)
misc box of bonus goodies i would be happy to give away along with the stuff (on pick up)
if you wanted the bs3 stand alone wriring harness for the v6 (not a stock computer plug bs3 adapter harness) i could let that go negotiable
pics/vids:
http://www.syty.net/forums/showthread.php?t=56351
this would be coming out for an lsx swap.
$5k you pick up 23060 near Richmond VA
my cell 804-314-7966 call w/ any questions or MIGHTYM0USE@comcast.net
__________________
...
Comment