Announcement

Collapse
No announcement yet.

Interest in my motor setup? Looking to sell 407hp and 404ft-lbs

Collapse
X
Collapse
Who has read this thread:
 
  • Page of 2
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • #1

    Interest in my motor setup? Looking to sell 407hp and 404ft-lbs

    Hey guys I am possibly looking at selling my motor setup from the FAST FI and the MSD ignition to the oil pan. Check my garage for a detailed description. It has approx 8,000miles on it. I have receipts for almost everything including the block work and rotating assembly machining, and assembly. I can also get pictures. Some of the guys on here can vouch for me.

    87 350 roller block .030 over
    ARP main studs with Moroso Windage tray
    Stock crank that has been polished and chamfered
    Speed pro Hypereutectic flat top pistons 10.1:1 comp
    dart iron eagle platinum heads 200cc intake 64cc Comb 2.02/1.60 valves
    Comp cam XR276HR with matching springs, retainers, pushrods, etc.
    Holley Stealth Ram with BBK 58mm throttle body
    FAST FI
    MSD pro billet dist(small cap) and wires
    MSD remote coil
    MSD 6al

    I might be willing to part out as well.

    Justin
    Last edited by 1bad83ta; February 20th, 2008, 03:30 PM.
    sigpic
    And another thing.....when I gun the motor, I want the whole world to think it's coming to an end.
    -Homer Simpson
    Tags: None
  • #2
    Dude, WTF?????

    Comment

    • #3
      Looking into getting a LS gen motor.
      sigpic
      And another thing.....when I gun the motor, I want the whole world to think it's coming to an end.
      -Homer Simpson

      Comment

      • #4
        Originally posted by 1bad83ta View Post
        Looking into getting a LS gen motor.
        Ok, then I'll endorse this sale, lol. Scared me, lol.

        Comment

        • #5
          thats a bad ass motor.

          here are some vids!!!

          http://www.joeldevriendt.com/files/p...t/MVI_4734.AVI
          http://www.joeldevriendt.com/files/p...t/MVI_4735.AVI
          http://www.joeldevriendt.com/files/p...t/MVI_4736.AVI
          http://www.joeldevriendt.com/files/p...t/MVI_4737.AVI
          -Joel
          1995 Z28 M6 - AI226/234 - autocross ricer
          1984 Scottsdale K10 - 305/4bbl/4spd


          WTB List:Midwest Chasis DS Loop

          Comment

          • #6
            for anyone interested do you have a price in mind?

            13th!!! Annual Michigan FBody Meet & Greet Car Show 2017
            June 10th, 2017 - 9am to 3pm!!!
            Bakers of Milford, Milford, MI


            Classics only cost alot if you add up what you spend!
            sigpic

            "The winner ain't the one with the fastest car, it's the one who refuses to lose."
            - Dale Earnhardt -


            Comment

            • #7
              I don't have a set price yet. I not sure what it is worth. I was looking at crate motors and to buy a motor set up like this its around 6K. I put a lot more money than that in it and would like to get around $4,500. But it all depends on what its worth to other people.
              sigpic
              And another thing.....when I gun the motor, I want the whole world to think it's coming to an end.
              -Homer Simpson

              Comment

              • #8
                good luck with the sale justin... i wish i could afford to just take that HSr and put it on my car but i don;t see that happening. if i was to go EFI i would be doing what your doing with a ls motor




                Comment

                • #9
                  your car looks very familiar.. I know the surroundings look VERY familiar.. sounds like it has some decent power too..good luck with your sale
                  99 Buick Regal GS- New DD

                  SOLD-1983 Firebird-305-2.5 inch custom bent exhaust w/ dynomax muffler-2004r-87 TA 3.08 posi-90 Camaro brakes-91-92 Hatch-87 TA bumpers and GFX-89 TA Tailights-87 TA front fenders-16 inch GTA wheels
                  SOLD-1967 Buick Skylark

                  Originally posted by ThreeHonks
                  I like having a loud car, every time the neighbors dog barks, I just go let my car sit and idle in the driveway

                  Comment

                  • #10
                    I can also vouch for this as the FAST and HSR setup was originally purchased by me. Good quality work done here, I got to watch the bastard pull his hair out waiting to get this thing together!
                    -08 G8 GT DD: Rotofab CAI, HID's, Breyton Race GTS'
                    -86 Iroc Project: LQ4, Th400, S400, Ford 9"

                    Comment

                    • #11
                      Yeah those vids are out on 28th st right by Berger. I took Joel and Matt for a ride. I am gonna try and get some of my pics back up. It looks like my garage is empty.

                      Thanks for the credit guys!
                      sigpic
                      And another thing.....when I gun the motor, I want the whole world to think it's coming to an end.
                      -Homer Simpson

                      Comment

                      • #12
                        Are you across the street Justin? At Vanessas house?
                        -08 G8 GT DD: Rotofab CAI, HID's, Breyton Race GTS'
                        -86 Iroc Project: LQ4, Th400, S400, Ford 9"

                        Comment

                        • #13
                          Good luck with the sale Justin! Go LS and never look back bro!
                          sigpic
                          Turbo Charged LS1/T56

                          Comment

                          • #14
                            if you part it out lrt me know iwould be interested in some of it i don't need all of it though. thanks

                            Comment

                            • #15
                              I have an LS1 and 4l60-e trans. LMK if your interested
                              sigpic

                              98' Trans Am - Huron Speed Turbo Car

                              Comment

                              Previous 1 2 template Next
                              Working...
                              X