Tweet
I have an early 60's 327 small journal block, crank, rods, pistons, and cam that were all together. The block needs to be completely machined due to wear and light rust. The rods and crank should be able to be turned for oversize bearings. I'm sure the crank is at least a steel crank if not possibly forged even. I also have what I believe to be the original cam, its a healthy one and looks useable but cams are cheap and you will need new lifters anyway so that's up to you. I bought the shortblock off a friend and tore it apart intending to get it all machined and put it in my '80 z28. Well, Not sure when I'm ever going to get to that and if somebody is interested for a fair price I'd be happy to part with the parts. I don't wanna ship any of it if I can help it so that's why I'm posting here. Asking $300/bo. So if you or anyone you know may be interested let me know. If someone is seriously interested I will get numbers off the block and pics.
-
-
TTT, I'd like to sell it. -
Figured since we have some new members, I'd give this a bump.Comment
-
Did you put it in the bargain corner? I saw a 327 in there. Just wondering if it was this one.
1978 Pontiac Firebird Formula W66
350 Small Block Chevy Bored .030 Over (355)
GM Performance Parts Vortec Heads
Holley 650cfm Double Pumper
Edelbrock Performer-Plus Cam
Edelbrock Vortec Performer RPM
Hedman Hedders 1-5/8" Long Tubes
2-1/2" Exhaust With "H" Pipe & Hooker Aero Chamber Mufflers
TH350 With B&M Transpak Shift Kit & 2400rpm Stall B&M Tork Master Converter
Comment
-
No, what is that?Originally posted by MrMojoRisin681Comment
-
The Bargain Corner is a section of the Grand Rapids Press where you can sell items for under $1000.
1978 Pontiac Firebird Formula W66
350 Small Block Chevy Bored .030 Over (355)
GM Performance Parts Vortec Heads
Holley 650cfm Double Pumper
Edelbrock Performer-Plus Cam
Edelbrock Vortec Performer RPM
Hedman Hedders 1-5/8" Long Tubes
2-1/2" Exhaust With "H" Pipe & Hooker Aero Chamber Mufflers
TH350 With B&M Transpak Shift Kit & 2400rpm Stall B&M Tork Master Converter
Comment
-
someone should buy this and and put it in my 96z roller I'm selling and make a cool retro 4th gen
Comment
-
yeah, well I might, I'll have pics of my truck this week. Sorry, I didn't make it out there last week.Originally posted by Timberwolfsomeone should buy this and and put it in my 96z roller I'm selling and make a cool retro 4th genComment
-
got some newbs lately so
Comment
-
Comment
-
hrmm
can you pm me with the casting numbers? i have a friend whom might be interested-Im Ron Burgundy?
----------------------------
-LT1 383 Stroker, 36 lbs SVO's, Comp Custom grind, Eagle H beam forged rotating assembly, 1.5 RR's, Hooker super comp LT's, custom straight pipes back to a pair of Thrush Turbo II's.. more to come.
Comment
-
Yeah, give me a couple days to get over there, its at my parents place. Sorry, kinda busy this weekend with my wedding. Sometime next week probably.Originally posted by Yoeasy69
Edit: scratch that, chang of plans, I'm going there this afternoon. I'll let you know later.Last edited by Orange Terror; March 16th, 2006, 10:58 AM.Comment
-
What kind of numbers could you expect from one of those motors???Comment
-
Originally posted by pheonix_rising
1000th POST!!!!!
Depends on how you build it. Its a 350 with a shorter stroke, so they'll rev faster, more HP, little less torque. Forged pistons, good heads, good intake, carb, ignition, could easily see 500+ HP IMO.Comment
-
FYI for anyone else, this is the casting number.
3782870Comment
Comment