Announcement

Collapse
No announcement yet.

Buyer beware

Collapse
This topic is closed.
X
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Buyer beware

    Curt_irocz
    Online Post Whore
    Re: Dash

    Me-
    two of those torq trust you sold me are bent and one other one they can't get the cap off. Thanks for the screw job.

    His response




    didn't know. **** you


  • #2
    Wow really "**** you" after you just took hundreds from me I asked you if any were bent and you said no. Thanks again. I dont want any money back or for you to really care but a hey man sorry I did not know would have been better than "didn't know" **** you" Thats class act Thank you! If anyone is buying from this guy please insure that you have all the details.

    Comment


    • #3
      I was selling them for a friend. I didn't know they were bent. And after Haveing a set price. That was already way cheap for the wheels. He tried cutting the price down. And heing and hawing about them for 35 minuites. Then you say they are bent and thanks for the screw job? No I don't have empathy or care when you tell me that. Other wise I'd say you can have your money back. I sell a lot of cars. And a ton of parts. With plenty of happy constumers. And if someone has a probelm, they let me know. Not mouth off. So I don't really care what you say.

      Comment


      • #4
        I am sorry that I wasted to much of your time while I thought about if I wanted to buy them. One more reason Buy Beware. Class act.

        Comment


        • #5
          "I was selling them for a friend. I didn't know they were bent."

          Then when I asked you, you should have told me that not NO

          Comment


          • #6
            If you want a seller to make things right it would be smart not to start by "thanking him for the screw job."
            -Joel
            1995 Z28 M6 - AI226/234 - autocross ricer
            1984 Scottsdale K10 - 305/4bbl/4spd


            WTB List:Midwest Chasis DS Loop

            Comment


            • #7
              I 100% agree it was heat of the moment as I was at the tire store being told you just wasted money. However "**** you" is far from what a person that I just trusted should say.

              Comment


              • #8
                How bad are they ? could they be fixed ? Sorry to hear about this situation
                sigpic

                Go BIG or go HOME!

                2000 Camaro SS Triple Black, 6 speed, Born 6/16/2000. SLP #8468. Plenty of Goodies

                Comment


                • #9
                  Ive dealt with Curt quite a few times always been a positive experience.
                  2011 Ford Raptor SuperCrew
                  SVT Beadlock Wheels
                  Roush Intake, Corsa Exhaust
                  20" and 40" Light Bars

                  2000 Camaro Z28
                  Stripped Down Drag Car Build

                  Project 1999 Camaro Z28


                  2009 G8 GT Stryker Blue Metallic-SHEGONE
                  Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                  RotoFab Intake, HSRK, Camaro Trans Pan
                  ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                  Pat G - 93 Octane Tune
                  Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                  CTS-V Calipers, Brembo Pads
                  H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                  HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                  2.55 Lingenfelter Pulley and Injectors waiting to go on!
                  sigpic

                  Comment


                  • #10
                    Originally posted by lanzar4155 View Post
                    I 100% agree it was heat of the moment as I was at the tire store being told you just wasted money. However "**** you" is far from what a person that I just trusted should say.
                    After you said "thank you for the screw job"...is he suppose to take that from you? ha
                    2011 Ford Raptor SuperCrew
                    SVT Beadlock Wheels
                    Roush Intake, Corsa Exhaust
                    20" and 40" Light Bars

                    2000 Camaro Z28
                    Stripped Down Drag Car Build

                    Project 1999 Camaro Z28


                    2009 G8 GT Stryker Blue Metallic-SHEGONE
                    Crate LS3, LS9 Cam, LSA Supercharger, Metco Solid Isolator
                    RotoFab Intake, HSRK, Camaro Trans Pan
                    ZL1 HX, ZL1 Fuel Pump, CTS-V Lid, LSA Injectors
                    Pat G - 93 Octane Tune
                    Kooks 1-7/8" Longtubes, High Flow Cats, X Pipe, Solo AxleBacks
                    CTS-V Calipers, Brembo Pads
                    H&R Lowering Springs, Whiteline Bushings, FE3 Struts/Shocks, Camaro 20" Wheels
                    HIDs, LED Conversion, Atari Gauges, Tint, Roof Carbon Fiber Wrapped, Innovative Wideband

                    2.55 Lingenfelter Pulley and Injectors waiting to go on!
                    sigpic

                    Comment


                    • #11
                      sounds like every body should take a step back and allow things to cool down before any more is said. maybe even mods lock the post for 24 hours or so?
                      When in doubt, Whip it out !

                      Comment


                      • #12
                        I agree for the cooling down, wait til tomm then discuss it over a beer
                        sigpic

                        Go BIG or go HOME!

                        2000 Camaro SS Triple Black, 6 speed, Born 6/16/2000. SLP #8468. Plenty of Goodies

                        Comment


                        • #13
                          Why lock it - we are all adults here.

                          Looks like some apologizes a hand shake and a (couple) beers could possibly fix this.
                          2000 Formula
                          fixed slow junk

                          Comment


                          • #14
                            I am not asking for any one to be sorry for me. I just want others to know that this guy will screw you as long as he gets paid. Yes I was wrong for saying "thanks for the screw job" however I am man enough to say I was wrong. Curt is not he told me they were not bent. When he had no idea if they were or not.

                            I ask none of you for sympathy. All I wanted to do is make others aware and by all you jumping on his band wagon just get the word out to cation others even more so please keep posting.

                            Comment


                            • #15
                              Originally posted by lanzar4155 View Post
                              I am not asking for any one to be sorry for me. I just want others to know that this guy will screw you as long as he gets paid. Yes I was wrong for saying "thanks for the screw job" however I am man enough to say I was wrong. Curt is not he told me they were not bent. When he had no idea if they were or not.

                              I ask none of you for sympathy. All I wanted to do is make others aware and by all you jumping on his band wagon just get the word out to cation others even more so please keep posting.
                              Thats the thing tho, if you wanted something to be resolved I know first hand Curt would have resolved this to make you both happy. But sounds like your happy with the bent wheels then!
                              sigpic
                              1992 Chevy Camaro 25th Anniversary-SOLD
                              1992 Chevy Camaro 25th Anniversary
                              1997 Chevrolet Corvette

                              The Original
                              Originally posted by meissen
                              I actually agree with Darren on everything he said...
                              Originally posted by 81DaytonaPaceCar
                              Yep, pretty much...not too often I agree 100% with Darren, but there it is...


                              Comment

                              Working...
                              X