Announcement

Collapse
No announcement yet.

White 98' Trans Am "Rediversary" Roller For Sale - Lots of Good Parts!

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • White 98' Trans Am "Rediversary" Roller For Sale - Lots of Good Parts!

    Up for sale is my Rediversary Trans Am in roller form. It was being set-up to be a dedicated drag car, but I have decided to halt the project and spend the money else where.


    Vehicle's current form:
    -No engine, trans included
    -No turbo components included other than FMIC mounted up front
    -Battery not included
    -10 bolt with 3.23's installed (car's factory rear end)
    -Dual 255 pumps in the tank (tank was removed for install)
    -All rest of factory fuel system in tact up into the engine bay
    -factory computer and wiring harness included
    -dash was removed and heater core + Pass Airbag removed
    -HVAC Block off plate installed
    -All interior is complete less seats (no seats included)
    -Entire exterior and engine bay just professionally painted in GM Arctic White
    -Stock Driveshaft Included
    -No exhaust included
    -No radiator installed


    Aftermarket Parts installed on vehicle:
    -PARacing Super Turbo K-member
    -PARacing Tubular Lower A-Arms
    -PARacing Tubular Upper A-arms
    -Strange SA Front Coil Overs
    -QA1 SA Rear shocks
    -Eibach Pro-Kit rear springs
    -PARacing Body Mounted Tq. Arm
    -Founders LCAs
    -Founders PHR
    -Unsure of brand, bolt in LCA Relocation Brackets
    -Unsure of brand, 3-point bolt in SFCs
    -Custom narrowed front WS6 wheels with fresh 185/55/17 M&H tires
    -WS6 wheels on rear with fresh 275/40/17 MT DR's
    -Front mount intercooler installed up front
    -Eboost Street Installed where HVAC used to be, solenoid mounted under engine bay
    -Vacuum Log mounted in engine bay
    -Catch can for boosted PCV system installed up near front bumper
    -B&M Trans Cooler installed up front behind FMIC with braided -6an lines ran back to trans area
    -GM WS6 Hood in Factory GM Arctic White Paint installed, Factory TA Hood with Fresh Arctic White painted included if buyer wants!
    -Wheels have a transparent red finish on them, and red/silver anniversary style stripes installed replicating an anniversary car in "red".




    $3750 with Factory hood only, you supply your wheels and tires
    +$700 to keep WS6 hood on it
    +$800 to keep wheels and tires on it


    Vehicle located in Port Huron, MI.


    Buyer must arrange pick-up.


    PM if interested to negotiate vehicle in a form that fits what you want!




















































    Last edited by Superman09; December 29th, 2012, 03:08 PM.
    sigpic

    98' Trans Am - Huron Speed Turbo Car


  • #2
    Re: White 98' Trans Am "Rediversary" Roller For Sale - Lots of Good Parts!

    Omg!

    Sent from my SPH-D710 using Tapatalk 2
    sigpic
    11.84 @ 117 w 1.66 60' (previous na best)

    - - 5.3/4L80e/T7875 - -
    - Huron Speed Turbo Kit -

    1998 Formula

    Comment


    • #3
      what?!?!
      sigpic
      1992 Chevy Camaro 25th Anniversary-SOLD
      1992 Chevy Camaro 25th Anniversary
      1997 Chevrolet Corvette

      The Original
      Originally posted by meissen
      I actually agree with Darren on everything he said...
      Originally posted by 81DaytonaPaceCar
      Yep, pretty much...not too often I agree 100% with Darren, but there it is...


      Comment


      • #4
        What the hell is going on here?

        From "build" thread to "for sale" thread?
        Originally posted by Redd8407
        I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
        Originally posted by Z28ISGR8
        WHY THE F*CK IS THERE A GOAT ON A FERRARI?
        Originally posted by Darren
        I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

        Comment


        • #5
          Originally posted by 81DaytonaPaceCar View Post
          What the hell is going on here?

          From "build" thread to "for sale" thread?
          Pretty typical for Johnny!
          sigpic
          1992 Chevy Camaro 25th Anniversary-SOLD
          1992 Chevy Camaro 25th Anniversary
          1997 Chevrolet Corvette

          The Original
          Originally posted by meissen
          I actually agree with Darren on everything he said...
          Originally posted by 81DaytonaPaceCar
          Yep, pretty much...not too often I agree 100% with Darren, but there it is...


          Comment


          • #6
            Not surprised at all! GLWS!


            Comment


            • #7
              It should go quick, looks to have a lot of good parts!

              If you decide to part it out PM me a price for panhard bar and rear lower control arm brackets.

              Comment


              • #8
                No one should really be surprised, haha. I am not planning on parting it out farther than this roller. I have plenty of other parts for sale extra such as:

                Forged 370 Shortblock
                CNC Ported 317 heads
                Detroit Gearbox Built RMVB and Trans Braked TH400
                ProTorque Revolution converter
                Nasty Performance Full Race Fuel System

                Many extras!
                sigpic

                98' Trans Am - Huron Speed Turbo Car

                Comment


                • #9
                  lol
                  Makin Torque.

                  Comment


                  • #10
                    Sure wish I had the time for another project... GLWS!

                    Comment


                    • #11
                      I may just tame the project back a bit and continue. Regardless the fuel system is way overkill, so I am going to sell that off for sure and if no real interest, I will probably put a little more basic fuel system in it, 9", 2 nice seats and enjoy it!
                      sigpic

                      98' Trans Am - Huron Speed Turbo Car

                      Comment


                      • #12
                        i'm thinking.........
                        98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

                        Comment


                        • #13
                          what in the world happened????
                          2000 WS.6 Build <--- click to see
                          1994 cummins turbo diesel 1million+ miles!! (rip dad)*my fathers old truck hell of a mechanic!

                          Comment


                          • #14
                            jeeze johnny pick a car n stick with it! i like the red though gives it some nice personality GLWS!
                            1995 Firebird Formula (Sold but not forgotten)

                            1998 Camaro Z28 LS1

                            2003 Silverado 2500HD CCSB 4x4 6.6 Duramax (DD with minor mods for better "MPG's")

                            2004 Trailblazer LT3 i6 4x4 (wifes ride)

                            Comment


                            • #15
                              i wish it was originally a 6spd car. glws!
                              98 z28, m6, monster clutch, eibach pro kit, custom twin turbo setup, 317 heads, z06 valve springs, arp rod bolts, 512rwhp at 10lbs. cobra eater

                              Comment

                              Working...
                              X