Announcement

Collapse
No announcement yet.

1985 Camaro Z28 Kentucky Car

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1985 Camaro Z28 Kentucky Car

    My grandfather recently gave me his project car because he's no longer working on it. It has alot of good things on the car and some things that need work too. I do not know everything about the car but Ill try my best.

    The car is an 85 Z-28 305 carb with and auto. Its from kentucky so the body has no rust.

    The Good.
    The car has new paint it looks pretty good the body has no rust at all and is in good shape.
    The interior is in good shape seats/carpet have been redone in the last year the headliner is also new.
    New rochester carburetor and alternator From advance auto parts replaced alittle over a year ago.
    Four New cooper Tires less then 500 miles on them.
    Fuel Pump replaced a couple years ago.
    Engine Idles smooth No ticks or Knocks.
    Battery was replaced 2 years ago.

    The Bad
    Needs a radio
    Front clip needs to be adjusted.
    Transmission acts funny Im honestly not sure if its slipping or these cars just have weird transmissions. Imo it will need a new trans sometime soon or atleast some work.
    It could use a new set of rims.

    IMG_20120311_194308.jpg
    IMG_20120312_175008.jpgIMG_20120312_175017.jpgIMG_20120312_175021.jpgIMG_20120311_194325.jpg



    Ill post up pictures later tonight Im asking $2200 734-259-9474
    Last edited by mtuggle86; March 28th, 2012, 09:56 PM.
    01 NBM Base SS build #514 M6 Pat G/EPS 230/234 111+4 Cam, LS2 Heads, Tick Master,Extreme Chassis 8.8 with 4.30's, BMR LCA And Torque Arm, Edelbrock PHB, FIPK intake, Ported TB. Jet-Hot LT Headers TSP True Duals Tuned By SB Tuning

  • #2
    350, 305, 5 Speed, auto?
    sigpic
    1992 Chevy Camaro 25th Anniversary-SOLD
    1992 Chevy Camaro 25th Anniversary
    1997 Chevrolet Corvette

    The Original
    Originally posted by meissen
    I actually agree with Darren on everything he said...
    Originally posted by 81DaytonaPaceCar
    Yep, pretty much...not too often I agree 100% with Darren, but there it is...


    Comment


    • #3
      305 auto
      01 NBM Base SS build #514 M6 Pat G/EPS 230/234 111+4 Cam, LS2 Heads, Tick Master,Extreme Chassis 8.8 with 4.30's, BMR LCA And Torque Arm, Edelbrock PHB, FIPK intake, Ported TB. Jet-Hot LT Headers TSP True Duals Tuned By SB Tuning

      Comment


      • #4
        very nice looking car!
        sigpic
        1992 Chevy Camaro 25th Anniversary-SOLD
        1992 Chevy Camaro 25th Anniversary
        1997 Chevrolet Corvette

        The Original
        Originally posted by meissen
        I actually agree with Darren on everything he said...
        Originally posted by 81DaytonaPaceCar
        Yep, pretty much...not too often I agree 100% with Darren, but there it is...


        Comment


        • #5
          Good looking car.
          Western Michigan Camaro Club ~ President
          1987 Camaro IROC-Z Pearl White & Black w/ Red Pearl, 355 TPI, A4, 3:42, AirRide,"GOMARO"
          2017 Silverado Double Cab Z71 Pepperdust Metallic, 5.3, A6, 3:42, "SASYZ71"
          2005 Pontiac Grand Prix GT White, 3800
          WMCC Website www.wmcamaro.org

          "A government big enough to give you everything you want,
          is strong enough to take everything you have." — Thomas Jefferson

          "Democracy will cease to exist when you take away from those who
          are willing to work and give to those who would not."
          Thomas Jefferson

          Comment


          • #6
            looks like the front end is fine, maybe the hood needs to be adjusted. All the body lines line up on the front clip. That hood latch should be adjustable to pull that hood down some.
            Very nice car though!
            sigpic

            Comment


            • #7
              Originally posted by tenpin842 View Post
              looks like the front end is fine, maybe the hood needs to be adjusted. All the body lines line up on the front clip. That hood latch should be adjustable to pull that hood down some.
              Very nice car though!
              The hood wasn't latched in that pic. When you latch the hood it looks like the front clip has a slightly larger gap on the passenger
              Side. It could very well be the hood that needs the adjustment but at first glance I would have to say that the front clip looks to be more of the problem
              01 NBM Base SS build #514 M6 Pat G/EPS 230/234 111+4 Cam, LS2 Heads, Tick Master,Extreme Chassis 8.8 with 4.30's, BMR LCA And Torque Arm, Edelbrock PHB, FIPK intake, Ported TB. Jet-Hot LT Headers TSP True Duals Tuned By SB Tuning

              Comment


              • #8
                ahhh got ya! how dare you throw me off like that...and its only Tuesday lol!!!
                sigpic

                Comment


                • #9
                  oooooooooh, thats pretty
                  91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
                  85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
                  00 Tahoe Z71........Stock
                  97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

                  Comment


                  • #10
                    Dropped thhe price what's the ballpark value for a 3rd gen like this?
                    01 NBM Base SS build #514 M6 Pat G/EPS 230/234 111+4 Cam, LS2 Heads, Tick Master,Extreme Chassis 8.8 with 4.30's, BMR LCA And Torque Arm, Edelbrock PHB, FIPK intake, Ported TB. Jet-Hot LT Headers TSP True Duals Tuned By SB Tuning

                    Comment


                    • #11
                      i think its around that just not a buyers market for thirdgens
                      91 Trans am, 305, Lt1 cam, 24lb injectors, headers, SLP LM2, SW chassis, massive panhard, lowered, modded TPI, Tuned, 4.10s, Lincoln locked
                      85 Z28 406/th400?/3.42 4th gen disc rear/4th gen dash
                      00 Tahoe Z71........Stock
                      97 K1500 lt4 cam, 1.6s, MPFI, Solid axled, IROKs,------winter beater

                      Comment


                      • #12
                        2000 should make this sale go pretty fast im sure u can get 2500 for it though car looks clean
                        2000 WS.6 Build <--- click to see
                        1994 cummins turbo diesel 1million+ miles!! (rip dad)*my fathers old truck hell of a mechanic!

                        Comment


                        • #13
                          If my garage wasn't already full... glws

                          Comment


                          • #14
                            I'm in no rush I'm sure it will sell soon enough.
                            01 NBM Base SS build #514 M6 Pat G/EPS 230/234 111+4 Cam, LS2 Heads, Tick Master,Extreme Chassis 8.8 with 4.30's, BMR LCA And Torque Arm, Edelbrock PHB, FIPK intake, Ported TB. Jet-Hot LT Headers TSP True Duals Tuned By SB Tuning

                            Comment


                            • #15
                              very nice - rare interior

                              13th!!! Annual Michigan FBody Meet & Greet Car Show 2017
                              June 10th, 2017 - 9am to 3pm!!!
                              Bakers of Milford, Milford, MI



                              Classics only cost alot if you add up what you spend!

                              sigpic

                              "The winner ain't the one with the fastest car, it's the one who refuses to lose."
                              - Dale Earnhardt -


                              Comment

                              Working...
                              X