Announcement

Collapse
No announcement yet.

95 z28 ($1350)

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 95 z28 ($1350)

    im selling my camaro it is the one in my sig. it currently has a 16x,xxx miles on it. the block was said to be rebuilt 5000 miles ago but the previous owner didnt have any receipts so i dont know.

    the good: all the mods in my sig, cheap, NOS dry kit, and its a good project

    the bad: interior is pretty rough, needs paint job, dent in the rear passenger quarter, no front end but i do have a 99 front bumper, hood, and fenders. all you need is the headlights and extra brackets. needs plug wires and im currently having problems with starting it. it will crank over but it wont start for a bit and then when it does it idles really rough for a bit and then clears out and runs fine. i have been told it could be the wires, o2 sensors, or a FPR.

    This car is not perfect or even close but for the 2200 its not a bad deal.

    i can get pics if you want.
    95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

  • #2
    I think I speak for everyone when I say... PICS PLEASE!

    Comment


    • #3
      lol yea i should have posted pics. i am currently living on campus but i can run home tonight and snap some.
      95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

      Comment


      • #4
        interested in pics
        wishing i could drive like joe and the atm squad

        Comment


        • #5
          here are some pics. make me an offer i just want this gone






          95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

          Comment


          • #6
            the black stuff on the drivers door is just the glue stuff from the molding
            95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

            Comment


            • #7
              Still available?
              2011 2SS/RS twin turbo
              1991 Z28 LS 370, 80mm turbo, 4L80E, Moser 9"
              738 rwhp 754 rwtq
              07 GSXR 750 TURBO 9.00 @152

              Comment


              • #8
                yes it is
                95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

                Comment


                • #9
                  make me a offer, i paid 2900 for it 2 months ago and i am willing to take a big loss
                  95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

                  Comment


                  • #10
                    If this thing was a 6 speed, I'd be all over it. . . . Good luck with the sale!
                    Nick H.
                    Current MIFC Vice President

                    sigpic

                    Comment


                    • #11
                      make me a offer, you guys will be surprised on how low i will go
                      95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

                      Comment


                      • #12
                        Originally posted by jeremy stanke View Post
                        make me a offer, you guys will be surprised on how low i will go

                        500??

                        Comment


                        • #13
                          obviously i need more than that, the n20 and headers are worth that. keep the offers above a 1000 please
                          95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

                          Comment


                          • #14
                            i will take 1500 cash
                            95 z28 automatic Edelbrock TES headers,Jasper Class II Performance Heads,Jasper LT1 block bored .30 over,B & M Torque converter,XL Fuel rail,High flow fuel pump,Meziere Enterprises electric racing water pump,K & N Cold air intake,Granatelli Mass Air Flow Sensor,TPIS Throttle Body Air Foil,3" Exhaust pipe,Hooker muffler, MSD Distributor

                            Comment


                            • #15
                              seems like a really good deal at that price, good luck with the sale
                              Last edited by white96TA; November 5th, 2008, 10:00 PM.

                              Comment

                              Working...
                              X