Announcement

Collapse
No announcement yet.

1976 trans am project car

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 1976 trans am project car

    I've owned this car for 11 years. Drove it for 4, & have had it torn apart for 7. Its got a new quarter panel, doorskin, & rocker on the drivers side. Other than some minor spots that need to be touched up on the body work that has been already done, the only things that still need to be gone through on the body is the front floorboards, & the front fenders. The front subframe is done, with new springs, control arm bushings, & whatever else it needed. The car still has the original 455 that it came with, which has also been gone through, with reworked heads, new crank, & has been balanced. It's got a 4 speed manual trans which needs some work, too(yes, its an original 4 speed car).I have 2 sets of factory t tops that go with it. The only parts that are missing off of the car are the passenger seat, carpet, front end ground effects(3 pieces), a filler piece that goes above the decklid, & the shaker assy. The original color is orange. VIN# 2w87w6n532358. The price $2500 The phone # (586) 212-5221 The name Dean
    Attached Files

  • #2
    Bump for a rare car...worth saving.
    Originally posted by Redd8407
    I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
    Originally posted by Z28ISGR8
    WHY THE F*CK IS THERE A GOAT ON A FERRARI?
    Originally posted by Darren
    I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

    Comment


    • #3
      Originally posted by 81DaytonaPaceCar View Post
      worth saving.
      Just what I was thinking.
      Looks like some of the hard part is done. If it really is a numbers matching engine/trans then it's priced pretty good as well.
      These were on my "short list" when I bought the Z.
      Wish I had the space and extra cash
      '73 Z28 388 Stroker, M22 Rockcrusher 4 speed
      WMCC Photographer and owner of Redline Photography
      You are only young once but you can be immature your whole life!!!
      sigpic

      Comment


      • #4
        Originally posted by zmanrc View Post
        Wish I had the space and extra cash
        I hear ya, Ray...

        A 455 4-speed car with T-tops...kind of the end of an era and the beginning of another...only year you could get those options together...
        Originally posted by Redd8407
        I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
        Originally posted by Z28ISGR8
        WHY THE F*CK IS THERE A GOAT ON A FERRARI?
        Originally posted by Darren
        I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

        Comment


        • #5
          Man that is going to be a nice project for someone. If I had a garage of my own I would be all over this type of project but maybe some day.

          Comment


          • #6
            Originally posted by zmanrc View Post
            Just what I was thinking.
            Looks like some of the hard part is done. If it really is a numbers matching engine/trans then it's priced pretty good as well.
            These were on my "short list" when I bought the Z.
            Wish I had the space and extra cash
            Everyones right so far that it would be a sweet project for someone. Life has changed alot for me in the past few years, and just have no time to finish it. The only Jones is that its not the original trans that came with the car.

            Comment


            • #7
              You probably already know, but it may be a good idea to post it on transamcountry.com.

              It's a pretty active 2nd gen Firebird site...shouldn't have any problems getting it sold there.
              Originally posted by Redd8407
              I WANT NOISE! SPEED! AN ENGINE THAT SHAKES MY INTERNAL ORGANS LIKE THEY GOT PARKINSON'S! I DONT WANT AN ENGINE THAT IS PARTIALLY POWERED BY MY LAPTOP BATTERY!
              Originally posted by Z28ISGR8
              WHY THE F*CK IS THERE A GOAT ON A FERRARI?
              Originally posted by Darren
              I think it is because I take it in and out all the time, the rubber has just stretched out, especially at the bottom where it is really thin. It annoys me more then anything.

              Comment


              • #8
                Originally posted by 81DaytonaPaceCar View Post
                You probably already know, but it may be a good idea to post it on transamcountry.com.

                It's a pretty active 2nd gen Firebird site...shouldn't have any problems getting it sold there.
                I did not already know that. Good lookin out, dude!

                Comment


                • #9
                  good luck with the sale

                  Comment


                  • #10
                    wow! I would love to have the time and money to put this one back together!!
                    -Joel
                    1995 Z28 M6 - AI226/234 - autocross ricer
                    1984 Scottsdale K10 - 305/4bbl/4spd


                    WTB List:Midwest Chasis DS Loop

                    Comment


                    • #11
                      Man, if I had the money...
                      - Brian Meissen
                      Owner, MiFBody.com
                      Administrator, LTxTech.com


                      1994 Camaro LT1 Transplant - 357ci LT1, cammed, stalled, and driven.
                      2022 Camaro LT1 - "Cherry Bomb 2"
                      Michigan FBody Meet & Greet Car Show 2022
                      June 4th, 2022 - 9am to 3pm!!!
                      The HUB Stadium, Auburn Hills, MI

                      Comment

                      Working...
                      X