Subframe connectors

[tenpin842]

Looking for a good set of Subframe Connectors for my 87 Trans Am.
I would like to know of a good set. I also would like a set that tucks up pretty good, because I have Eibach Sportline lowering springs going on in the spring.
I've been looking at the Hotchkis ones. But didnt know. I know some people have installed them, I was looking for the Weld in ones. Or bolt on ones I guess are ok.....I'll just weld them on one I bolt them in place.

Any tips would be great.
Thanks

[MiT/A'96]

:snowman: ... In my opinion ,the weld on or far much better ...

[tenpin842]

any brand better then the other? And brand tuck up under better then the others? I need to get some before I paint my car. I dont need it to stress crack again after I paint it.

[MiT/A'96]

:snowman: ... On my '69 Camaro I either had , Hotchkis or Competetion Engineering .But of course these are totally two different cars..

[tenpin842]

yeah those are the 2 that summit list.

[WMCC Gary]

I'm going with Spohn on my car.
http://www.spohn.net/product.cfm?productid=1309

Pictures of a set installed.
http://www.spohn.net//index.cfm?acti...d&contentid=10

[MiT/A'96]

http://www.hawksthirdgenerationparts.com/index.asp has Spohn's....
Good site !

[tenpin842]

Awsome, I'll get those then. Yeah I checked out both sites. There the same price. $195.00 thenim going to get then in red wich is an extra $45.00.

thanks for your help!!

[WMCC Gary]

Awsome, I'll get those then. Yeah I checked out both sites. There the same price. $195.00 thenim going to get then in red wich is an extra $45.00.

thanks for your help!!

glad we could help & I would just get black, it easier to touch up after welding.

[tenpin842]

I just figured my car was red. But it might be easier after I paint my car to black everything out with undercoating.

Thanks for the input everyone.

[98ultraz]

Todd there is also UMI http://www.umiperformance.com/Search...?CategoryID=42

[Keego Ridah]

check these out! I just got all they offer for my car its good stuff and its real light, it says bolt-on but you can weld them
http://www.swracecars.com/shopping/s...ion+Components

[tenpin842]

wow, the S&W ones are expensive. I dont put down that much power to be that picky.
The UMI ones look pretty cool. And are only $199

I'll have to do some price shopping & also see what they are charging for shipping. I guess that will decide what I get.

[SS4Matt]

I have the S&W ones as well, Sean@CARS welded them in for me, they tuck up so high unless you get on your hands and knees and look UP you can't see them at all. they are really nice because they weld in on the floor pans as well as the front and rear, they are extremely tight!

[1bad83ta]

Todd the Spohn weld on ones are the best. I have them on my car and they work very well. They tuck up under the car and are curved so they conform to the floor pans. +1 for Spohn!