I was wondering if the was a place that made HID conversion kits for the third gen camero. I see the cheap kits on ebay and stuff. Has anyone done this
Announcement
Collapse
No announcement yet.
H.I.D. For Third Gen
Collapse
X
-
Check with our site sponsor at www.eurolights.com. If they cannot help I may have another source for you.
-
-
-
InActive Member
- November 18th, 2007
- 439
- Mike
- 2002 Camaro LS1 M6
- Ortonville Michigan
- Fork lift repainter
- Send PM
I'd get the sealed beam conversion kit and then buy the HID kit off of ebay. I have them in my 4th gen and there sweet! The brand I have is MKS and I have had no problems with them and there also 8000K's which is a nice light blue and it lights up the road nicely
Comment
-
thanks for the input I have no idea what i should even look forOriginally posted by 02RedCamaro View PostI'd get the sealed beam conversion kit and then buy the HID kit off of ebay. I have them in my 4th gen and there sweet! The brand I have is MKS and I have had no problems with them and there also 8000K's which is a nice light blue and it lights up the road nicely

Comment
-
\,,/>_<\,,/
- May 11th, 2006
- 10130
- Mark
- 2023 Malibu, 2022 Explorer
- Winston Salem, NC
- Manager of Telecom Engineering
- Send PM
Stay away from the kits for the 3rd gens on ebay. I had them in my old bird and they got so hot they started to melt the sockets. At least the 1's for the Firebirds.
Comment
-
x2 be careful. My brother in law bought some for his dodge truck on ebay. Melted his sockets and some wiring. When he complained they offered him a new set of bulbsOriginally posted by SouLTeRRoR View PostStay away from the kits for the 3rd gens on ebay. I had them in my old bird and they got so hot they started to melt the sockets. At least the 1's for the Firebirds.
1989 TTA 23,000 miles, ran 12.42@107 with stock long block, turbo & intercooler.
Just installed Precision Dbb 6262rs, 4.1L stroker, Ported heads, dutt neck IC, and other stuff
1995 Z28, hardtop M6, edelbrock tb, sfc's, K&N intake, B&M shifter, spec 3 clutch, 4.10 gears, and other stuff
Comment
-
Post Whore

- March 29th, 2006
- 1080
- Eric H
- 1997, Pontiac, Trans Am
- Middleville, MI
- Chemical Tech.
- Send PM
Anyone know what ebay companies are good for sure? The price can vary so widely from other websites that I don't see it worth the hassle buying from them. My theory is that most places end up with the same kits, and put different stickers on the ballast. I'm considering an ebay brand for my H3 driving lamps.
Comment
-
\,,/>_<\,,/
- May 11th, 2006
- 10130
- Mark
- 2023 Malibu, 2022 Explorer
- Winston Salem, NC
- Manager of Telecom Engineering
- Send PM
I'd find a site that says which bulbs work safely and go from there. I won't buy a conversion kit every again off ebay. Wasted $40, they where nice though till they started melting the plugs.
Comment
Comment