4 headlight mod?

[greenmachine]

ok heres my question how hard would it be to make it so all 4 of my headlights come on when i have just the normal lights on? how do i do it?theres no point on having my high beams anymore cauz i never need to use them and they dont work anyway lol,

could i just use the foglights that i have on my car now? there only 30bucks at meijers but will they fit there? im not even sure how the foglights bolt on to the car cauz i didnt put them on. well i gess what im saying is i dont know nuthing and i need some one to explain it to me lol.

ill see if i can find my fogs online so i can post up a link so you guys know witch ones im talking about.

[JoeliusZ28]

i did the mod on my car, it was cake. unfortunately the writeup i used is down. its easy though. you pretty much just cut a wire, extend one side of it and ground it on the frame-ish piece by the headlights, and tape up the other end of the wire.

[greenmachine]

you dont need new bulbs? if you dont change the brites wont it be like having your brites on?

[JoeliusZ28]

yea, thats what i meant. what i did allows you to have ALL beams on simaultaneously, which is what you would need to do if you wanted to convert your brites to regulars and still use the fogs.

[greenmachine]

yah dude i know, what i was trying to say was.... if i do what you said but i dont switch out the brites with regular driving lites wouldnt it be like driving around with the brites on? i dont want them to be so brite that everyone is allways flashing there lights at me.

[JoeliusZ28]

yea it would. my car has aftermarket bulbs in both housings - so mine are REALLY bright when i have everything on. definitely couldnt use them when other cars are around.

[1fstss]

it would be hard on your system as your going to be trying to draw alot of juice through a little wire, that could mean realy bad things (like fire)

[greenmachine]

is there a different way to do it?

[JoeliusZ28]

it would be hard on your system as your going to be trying to draw alot of juice through a little wire, that could mean realy bad things (like fire)

havent had any problems w/ mine *knocks on wood*

[greenmachine]

well i got 2 of the headlights in, it was a lot more work than i thaught, well maby not work but time

heres some pictures....in the pictures the lights look red but there not i just didnt give the camera time to focus.

[JoeliusZ28]

you plan on using the same housing for all four?

[greenmachine]

what?


there replacing the stock headlights, today im gona take out the low beam lights and put the blue ones there

oh i also put this in the rong thred it should have went into my foglight question

[greenmachine]

like this but only im not spending 400 bucks on headlights
spending 400 on headlights ------> :thatsgay:

[JoeliusZ28]

there replacing the stock headlights, today im gona take out the low beam lights and put the blue ones there

thats what i was asking

[greenmachine]

yah there in and done now. ill take pictures after i warm up so now all i half to do is ajust them when it gets dark and then tmmr i gota run the switch for the lights that are were the high beems were, i have them on a seperate switch so i dont burn up my wireing like 1fstss said

ok here are the pics