Welcome to the Michigan FBody Association website.
The Michigan FBody Association is a centralized website for FBody enthusiasts to discuss what's going on in the Michigan area. MiFbody.com was created to allow for an easy one-stop place to find out what's going on in Michigan as far as FBody events, to find out what clubs are available in your immediate area, and for an easy place to post classifieds for items you want to sell! Our goal was to create a more close-knit community of FBody enthusiasts in the state of Michigan, and to bring Camaro and Firebird enthusiasts alike together for some amazing FBody events!
The most important thing to know about the Michigan FBody Association is that we are NOT a club! The Michigan FBody Association is open to everyone, and is a community. Thus, we will have get togethers, casual cruises, events, and such like that, but this is not an exclusive club and it's 100% free to join this site! So what are you waiting for? Register now!
If you have any problems with the registration process or your account login, please contact us!
ok so the gf told me to start looking for stuff I want for my bd so I decided I want a torque arm but I want the adjustable one from edelbrock but what I want to know is will it fit a 9'' or 12 bolt cause by the end of the summer I plan putting one of those in so I dont want have to buy another torque arm thanks
I would research BMR, UMI or Spohn. I have read likes and dislikes over on LS1tech. Depends upon what you want to do with the car too. I was thinking about the BMR Trak Pak to take the load off of the trans tailshaft, but learned that that one is more for drag racing and not good for road racing type use. And since I still want to DD my car I will probably stick with a regular adjustable torque arm with a relocation bracket so the trans is not getting loaded.
I have also read how some of the torque arms are made to fit different rearends. Some require some trimming (2 sets of mounting holes, and you cut away the unneeded set). That may be necessary with some of these when you do change your rearend.
i run a JEGSTER torque arm its tunnel mounted its a very nice peice i highly recummend it and the kit is around 305 from jegs... I like love it just make sure you now how to adjust your angle and make sure you get the angle tool.......
Tweet
Comment