plugs for nitrous

[WS6]

well my 6spd went so I figure sense I am under the car and its out of service for awhile I figure why not do the plugs for nitrous but I dont know what kind of plugs I need to run nitrous so any would great thanks.

[silver6_maro]

Ngk Tr6

[wasjo6431]

as stated ngk Tr6's

[WS6]

ok cool thanks guys

[motownZ]

stock will be fine but TR6 are the coler and more suited for NX

[97rs4life]

stock will be fine but TR6 are the coler and more suited for NX

stock would not be fine for a nitroused car. Highly recommend NGK TR6 plugs for all nitrous running cars

[kammi10]

does it matter with aluminum heads or would i need different ones?

[mcssmostwanted]

stock would not be fine for a nitroused car. Highly recommend NGK TR6 plugs for all nitrous running cars

Yup i run the NGK TR6 and i hav emine gapped at .035

[motownZ]

stock would not be fine for a nitroused car. Highly recommend NGK TR6 plugs for all nitrous running cars

sure its always to be on the safe side but if you go to some race shops theyll tell you that the stock ones will work fine unless your driving you car 95% NX 5% daily driver, call up livernois or something.

not trying to get on your statement just saying for the average-minimal NX user it should be fine, but like the plugs state ( for NX) i also wouldnt take the chance)

[mcssmostwanted]

sure its always to be on the safe side but if you go to some race shops theyll tell you that the stock ones will work fine unless your driving you car 95% NX 5% daily driver, call up livernois or something.

not trying to get on your statement just saying for the average-minimal NX user it should be fine, but like the plugs state ( for NX) i also wouldnt take the chance)

Yea i was told stock plugs were fine too.. but the cost for the NGK TR6 plugs is around $16-$20 so why risk it? it isn't a chance I would risk.