Announcement

Collapse
No announcement yet.

Help with fixing a T top leak

Collapse
X
Collapse
Who has read this thread:
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help with fixing a T top leak

    If anyone is out there is good at fixing T top leaks, i could really use you're help. I have a small leak where the t top meets the windscreen and i have tried different things to fix it with no luck. So if you are familiar with the repair and want to make a few bucks let me know. Im not rich or anything but let me know what you think the job is worth. Thanks
    95 T/A m6, cc503, harland sharp 1.6 rr, long tube pacesetters wrapped, 3" cutout, K&N, Moog suspension

  • #2
    Id say at least 90% of the time the source of these is a bad window adjustment. Pop off your door panels (remove screws, lift UP and away from the door) and you'll find there are around 3-5 adjustments on the window regulator where it mounts to the doorskin. Just loosen some of those up and play around with it a bit. Youll probably want to pay attention to the front end of the window stop height and how firmly the window seats against the seal.
    -Joel
    1995 Z28 M6 - AI226/234 - autocross ricer
    1984 Scottsdale K10 - 305/4bbl/4spd


    WTB List:Midwest Chasis DS Loop

    Comment


    • #3
      there is a rubber plug at the windshield at the end of t top frame if that is missing water enters and leaks through.
      sigpic
      1998 Trans Am Convertible A4 - WS6 hood, WS6 air lid, WS6 rims, drilled/slotted rotors.

      Comment


      • #4
        I don't suppose i could bother you for a picture of the plug and it's location? I looked but didn't see the plug you were talking about
        95 T/A m6, cc503, harland sharp 1.6 rr, long tube pacesetters wrapped, 3" cutout, K&N, Moog suspension

        Comment

        Working...
        X