Looking for a tunning company here to put a motor in

[GODSPEED]

Hey guys what company here puts in motors here for f body cars that are good i need some work done

[OVRKILL]

You need one built? Will bring one done? Need more info....I've got a shop on my side of town more than capable.

[1BADAIR]

shortblock, longblock?
whatcha need

[farmington]

try motor city speed near Maple and M-5 248 669-5810

[GODSPEED]

Im buying a MAST motor and i dont have the means to put it in im looking for someone that is good for the job plus rear end work and tuning but i mite go with someone that can build a motor i want that 550 to 650 horsepower range

[farmington]

call motorcity speed. Billy Briggs can build you anything you want, probbly for less than Mast too. They are a full service shop specializing in LSx motors. Good guys.

[DETROITMUSCLE]

Billy is one of, if not the top, LS engine builder in the country he will do you right.

[1BADAIR]

600 at the tire?

[GODSPEED]

yes if it can happen, about the 600 rwhp im not big on the knowing these motors just yet as far as inside and out like what combos are the best just yet but ill give him a call tomorrow and see whats up thank you guy very much

[1fstss]

get ready to buy a turbo or supercharger

[GODSPEED]

How do you guys feel about this motor

F35153900.jpg
Edelbrock Supercharged GM LS 416CID 702HP Crate Engine
Now available from Edelbrock, is a complete 416 c.i.d. supercharged, LS engine, that produces an astounding 702 horsepower and 658 ft-lbs. of torque, on 91 octane pump gas. The foundation of this engine is a brand new, GM aluminum LS3 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. The 4.0" stroke, and 4.065" bore pushes this LS3 out to a whopping 416 c.i.d., for incredible low end torque. The 9.5:1 compression ratio allows for safe and reliable supercharged performance on 91 octane pump gas.
Helping this engine breathe is the Edelbrock E-Force LS3 supercharger system. This great looking system features Eaton TVS 2300 cc/rev rotors, which provide unparalleled efficiency, whisper quiet operation and OEM reliability. This engine package comes complete with essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb/hr. fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and a Corvette belt offset for a compact installation.

Specifications:
Power: 702 HP, 658 ft. lbs. of torque, click on Documents Tab for Dyno Sheet
Displacement: 416 CID
Bore x Stroke: 4.00” x 4.065”
Compression Ratio: 9.5:1
Recommended Fuel: 91 Octane
Block: New GM LS3 Aluminum .
Crankshaft: Forged 4340, Standard LS 6-Bolt Flange
Connecting Rods: Forged H-Beam
Pistons: Forged Aluminum - 18cc
Camshaft: Hydraulic Roller Tappet
Cam Lift: .629” Intake / .656” exhaust
Cam Duration @ .050”: 215deg. Intake / 247 deg. Exhaust
Lobe Separation: 121 Degree
Rocker Arms: Stock LS3 1.7:1 Ratio
Valve Springs:Edelbrock ED5768
Balance: Internal
Reluctor Wheel: 58X
Finish: Black Powder-coated Finish

See Additional Images for Components included with this engine.

Warranty:

2 year / Unlimited mileage parts & labor warranty. IT WILL COST ME 18,000 FOR IT