Tweet
Hello again, here is the situation. I am just brainstorming what I would do to my engine if it were to die on me in the near future. I would make it into a sweet nitrous engine (run 150 shot, maybe dual stage with 75 and 100). I wouldn't want anything to be left out because once I have it apart, there should be no need to rip into it ever again. So I am talking heads/intake/cam/pistons, everything. Here is what I came up with. Let me know if there is anything you think I would need and should add to the list. Spare motor I could do without, just thought it might be a good thing to have an extra in case all hell breaks loose with the built one, lol.
Item Price Bought From:
Spare Motor $300 camarov6.com
HP Tuners $400 HP Tuners
XP Hot Cam $300 ZZP
Comp Cams 915, 105# Valve Springs $125 ZZP
Comp Cams Hi-Tech Push Rods $96 ZZP
Low Profile Valve Spring Retainers $37 ZZP
SI Stainless Valves $0 supersixmotorsports.com
Valve Seals $19 ZZP
SSM Stage 3 PowerPack $1,600 supersixmotorsports.com
P&P heads $0 supersixmotorsports.com
P&P Intakes $0 supersixmotorsports.com
Polish heat treat Crank $75 More Power Inc. (in GR)
L32 Connecting Rods $259 3800performance.com
Wiseco Forged Pistons $650 supersixmotorsports.com
Balance/Blueprint Motor $125 More Power Inc. (in GR)
Cam Install Kit $95 ZZP
Timing Chain $36 ZZP
ARP Connecting Rod Bolts $100 ZZP
ARP Head Stud Kit $80 ZZP
ARP Main Stud Kit $50 ZZP
Clevite 77 Cam Bearings $15 ZZP
Clevite 77 Main Bearing Set $50 ZZP
Clevite 77 Rod Bearing Set $25 ZZP
Intense Oil Pressure Kit $28 ZZP
B&M Tranny Cooler $40 AutoZone
Total $4,505
So roughly $4200 w/out the spare motor. Also ZZP maybe will give me a discount for buying so much. They are only 15 min away from me, so maybe I can talk them into sponsoring me if this ever came to be, lol. No labor costs needed, I would just do it all in my dad's shop, so that saves me money.
Also anyone know where to get some of this stuff cheaper? I tried to find the cheapest places for each thing. ZZP seems to be the go-to place for our parts, lol.
Item Price Bought From:
Spare Motor $300 camarov6.com
HP Tuners $400 HP Tuners
XP Hot Cam $300 ZZP
Comp Cams 915, 105# Valve Springs $125 ZZP
Comp Cams Hi-Tech Push Rods $96 ZZP
Low Profile Valve Spring Retainers $37 ZZP
SI Stainless Valves $0 supersixmotorsports.com
Valve Seals $19 ZZP
SSM Stage 3 PowerPack $1,600 supersixmotorsports.com
P&P heads $0 supersixmotorsports.com
P&P Intakes $0 supersixmotorsports.com
Polish heat treat Crank $75 More Power Inc. (in GR)
L32 Connecting Rods $259 3800performance.com
Wiseco Forged Pistons $650 supersixmotorsports.com
Balance/Blueprint Motor $125 More Power Inc. (in GR)
Cam Install Kit $95 ZZP
Timing Chain $36 ZZP
ARP Connecting Rod Bolts $100 ZZP
ARP Head Stud Kit $80 ZZP
ARP Main Stud Kit $50 ZZP
Clevite 77 Cam Bearings $15 ZZP
Clevite 77 Main Bearing Set $50 ZZP
Clevite 77 Rod Bearing Set $25 ZZP
Intense Oil Pressure Kit $28 ZZP
B&M Tranny Cooler $40 AutoZone
Total $4,505
So roughly $4200 w/out the spare motor. Also ZZP maybe will give me a discount for buying so much. They are only 15 min away from me, so maybe I can talk them into sponsoring me if this ever came to be, lol. No labor costs needed, I would just do it all in my dad's shop, so that saves me money.
Also anyone know where to get some of this stuff cheaper? I tried to find the cheapest places for each thing. ZZP seems to be the go-to place for our parts, lol.
. I have done business with him for about 4 years. They bought my GM Prototype Aluminum 3800 heads for one of the ZZP race cars.Email me a list and i'll see how much i can get taken off for you.
So Travis, how did you like this setup?
Comment